Full Text
REGD. No. D. L.-33004/99
The Gazette of India
CG-DL-E-29042026-272155
EXTRAORDINARY
PART II-Section 3-Sub-section (ii)
PUBLISHED BY AUTHORITY
No. 2058]
NEW DELHI, WEDNESDAY, APRIL 29, 2026/VAISAKHA 9, 1948
[F. No. 14/18(2024)-ΑΕΙ (30044)]
MINISTRY OF HEAVY INDUSTRIES
NOTIFICATION
New Delhi, the 29th April, 2026
S.O. 2131(E).— Amendment to PMP for N2 and N3 category of e-Trucks under the PM Electric Drive
Revolution in Innovative Vehicle Enhancement (PM E-DRIVE) Scheme
1. The PM E-DRIVE Scheme was notified by the Ministry of Heavy Industries vide S.O. 4259(E) dated 29th
September 2024. The Phased Manufacturing Programme (PMP) for e-Trucks was notified by MHI vide S.O. 3081
(E) dated 10th July 2025 and further amended by S.O. 4481(E) on 30th September 2025 and S.O. 1331(E) on 13th
March 2026.
2. Now Sr. No. 5,6 & 7 of the PMP of e-Trucks (N2/N3) is further amended as below with effect from date of its
publication in the Official Gazette.
+-----+----------------------------+--------------------------------------------------------------------------------+
| S. | PMP | N2 and N3 Category |
| No. | Component | |
+=====+============================+================================================================================+
| 5 | Battery Management | With effect from 1st September 2026 |
| | System (BMS) | |
| | | Manufacturing of BMS which at least includes assembly of electronic |
| | | components/semiconductors/connectors on the PCB, wiring, connector fitment, |
| | | heatsink fitment (if provided), enclosure fitment, software/firmware flashing |
| | | shall be domestically performed. |
| | | Up to 31st August 2026, import of BMS may be permitted. |
+-----+----------------------------+--------------------------------------------------------------------------------+
| 6 | DC - DC | With effect from 1st September 2025: |
| | converter | |
| | | Manufacturing of DC – DC converter which at least includes integration of |
| | | assembled PCB (PCBA), wiring and crimping, connector fitment, heat-sink |
| | | fitment, enclosure fitment, software/firmware flashing shall be domestically |
| | | performed. |
| | | |
| | | With effect from 1st September 2026 |
| | | |
| | | Manufacturing of DC DC converter which at least includes assembly of |
| | | electronic components/ semiconductors/connectors on the PCB, wiring and |
| | | crimping, connector fitment, heat- sink fitment, enclosure fitment, |
| | | software/firmware flashing shall be domestically performed. |
+-----+----------------------------+--------------------------------------------------------------------------------+
| 7 | Vehicle | With effect from 1st September 2025: |
| | Control Unit | |
| | | Manufacturing of Vehicle Control Unit (VCU) which at least includes |
| | | integration of assembled PCB (PCBA), wiring, connector fitment, heat-sink |
| | | fitment, enclosure fitment, software/firmware flashing shall be domestically |
| | | performed. |
| | | |
| | | With effect from 1st September 2026 |
| | | |
| | | Manufacturing of Vehicle Control Unit (VCU) which at least includes assembly |
| | | of electronic components/ semiconductors/connectors on the PCB, wiring, |
| | | connector fitment, heat- sink fitment, enclosure fitment, software/firmware |
| | | flashing shall be domestically performed. |
+-----+----------------------------+--------------------------------------------------------------------------------+
[F. No. 14/18(2024)-ΑΕΙ (30044)]
Dr. HANIF QURESHI, Addl. Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054. SARVESH KUMAR KUMAR SRIVASTAVA
SRIVASTAVA
Digitally signed by SARVESH
Date: 2006.04.29 18:38:54
Login to read full text