Full Text
CG-DL-E-18122025-268626
EXTRAORDINARY
PART II—Section 3—Sub-section (i)
8486 GI/2025
(1)
X 100%
MINISTRY OF STEEL
NOTIFICATION
New Delhi, the 17th December, 2025
G.S.R. 904(E).— In supersession of earlier Domestically Manufactured Iron & Steel Products
Policy, the revised Domestically Manufactured Iron & Steel Products Policy-2025 for providing
preference to Domestically Manufactured Iron & Steel Products in Government procurement is
hereby published for general information.
POLICY FOR PROVIDING PREFERENCE TO DOMESTICALLY
MANUFACTURED IRON & STEEL PRODUCTS IN GOVERNMENT
PROCUREMENT- REVISED, 2025
1. Background
1.1. This policy provides preference for Domestically Manufactured
Iron and Steel Products (DMI&SP) in Government procurement.
1.2. The policy applies to procurement of iron & steel products notified
in Appendix A, procurement of capital goods listed in Appendix
B and technology from indigenous technology suppliers in
Appendix C.
2. Definitions
2.1. Bidder may be a domestic/foreign manufacturer of iron & steel or
their selling agents/ authorized distributors/authorized dealers/
authorized supply house or any other company engaged in the
bidding of projects funded by Government agencies.
2.2. Domestically Manufactured Iron & Steel Products are those
iron and steel products that are manufactured by entities that are
registered and established in India, including in Special Economic
Zones (SEZs).
2.3. Domestic Manufacturer is a manufacturer conforming to Section
2(72) of the Central Goods and Services Tax (CGST) Act, 2017.
2.4. Domestic value addition means the amount of value added in
India which shall be the total value of the item to be procured
(excluding net domestic indirect taxes) minus the value of
imported content in the item (including all custom duties) as a
proportion of the total value of the item to be procured, in percent.
The ‘domestic value addition’ definition shall be in line with the
DPIIT guidelines and shall be suitably amended in case of any
changes by DPIIT in the future. For the purpose of this policy
document, domestic value addition and local content have been
used interchangeably.
% Domestic value addition =
{Total value of the item to be
procured (excluding net domestic
indirect taxes) – The value of
imported content in the item
(including all customs duties)}
X 100%
{Total value of the item to be procured}
2.5. Finished Steel means flat and long products, which can be
subsequently processed into manufactured items.
2.6. Government for the purpose of the Policy means Government of India.
2.7. Government agencies include Government PSUs, Societies,
Trusts, and Statutory bodies set up by the Government of India.
2.8. Indigenous Technology: A technology shall be deemed to be
Indigenous technology if, at least 51 % of the entity’s equity is
held by Indian residents and the IPR is owned or co-owned by an
Indian entity or licensed exclusively to them and the core
engineering R&D, and project execution capabilities reside in
India.
2.9. L1 means the lowest tender, or the lowest bid or the lowest
quotation received in a tender, bidding process, or other
procurement solicitation as adjudged in the evaluation process as
per the tender or other procurement solicitation.
2.10. MoS means Ministry of Steel, Government of India.
2.11. Margin of purchase preference means the maximum extent to
which the price quoted by a domestic supplier may be above L1 for
the purpose of purchase preference. In the case of DMI&SP policy,
the margin of purchase preference shall be 2 0 % for items in
Appendix B.
2.12. Melt & Pour is defined as the steel that has been produced in a
steel-making furnace and poured into its first solid shape. The
location where this process takes place is called the country of melt
and pour (COM). The COM is the original location where crude
steel is first produced in a liquid state and poured into its first solid
shape. The country of melt and pour (COM) should be India. The
first solid shape can be a semi-finished product, like a slab, billet,
ingot, or a finished steel mill product.
2.13. Net Selling Price means the invoiced price excluding net domestic taxes and
duties.
2.14. Semi-Finished Steel means Ingots, billets, blooms, and slabs,
which can be subsequently processed into finished steel.
3. Exclusions
3.1. Waivers may be granted by the Ministry of Steel to all such
Government procurements subject to the below conditions:
3.1.1. Where specific grades of steel are not manufactured in the country, or
3.1.2. Where the quantities as per the demand of the project cannot
be met through domestic sources.
3.2. Exemption requests shall be submitted to the Standing Committee
along with sufficient proof of unavailability of iron & steel
products domestically.
4. Standing Committee
4.1. A Standing Committee chaired by the Secretary (Steel), shall
oversee the implementation of the policy.
4.2. The Committee shall comprise of experts drawn from
Industry/Industry
Association/Government
Institution
or
Body/Ministry of Steel. The said Committee in MoS shall have the
mandate for the following:
4.2.1.
Monitor the implementation of the policy.
4.2.2. Review and notify the list of Iron & Steel products, the
domestic content requirement criteria and policy directives
as mentioned in Appendix A, Appendix B and Appendix C.
4.2.3. Issue necessary clarifications for implementation of the
policy including grant of exclusions to procuring agencies.
4.2.4. Constitute
a
grievance
redressal
committee
for
preliminary
examination
of
complaints
related
to
implementation of this policy.
4.2.5. Issue
directions
for
suitable
action
to
Ministries/Departments concerned in case of non-
compliance with this policy by the procuring agency and
advise.
4.3. Wherever a procuring entity concludes that an unreasonably high
price has been quoted by the sole bidder/manufacturer, the matter
may be referred to the Committee. In such cases, the procuring
entity would be required to substantiate its case with complete and
thorough documentation.
4.4. Specifying
foreign
certifications/unreasonable
technical
specifications in bid document is a restrictive and discriminatory
practice against local suppliers. If foreign certification is required
to be stipulated because of non-availability of Indian Standards
and/or for any other reason, the same shall be done only after
written approval of the Committee.
5. Applicability
5.1. The policy applies to every Ministry or Department of
Government and all agencies/entities under their administrative
control and to projects funded by these agencies for the purchase
of iron & steel products for government projects. All Central
Sector Schemes (CS)/Centrally Sponsored Schemes (CSS) for
which procurement is made by States and Local Bodies, come
within the purview of this Policy if that project/scheme is
fully/partly funded by the Government of India.
5.2. The policy applies to public sector steel manufacturers and
agencies/entities under their administrative control for purchase of
capital goods (Appendix-B) for manufacturing iron & steel
products.
5.3. Appendix-B contains the list of capital goods used in
manufacturing iron & steel products which can be imported, and
the applicable minimum domestic content requirement for
packages.
5.4. A purchase preference of 20% is applicable for capital goods used
in steel manufacturing. For example, if the lowest bidder (L1) for
an importable capital good is a foreign company with a quoted
price of Rs.100 crore for the product package, under the policy,
procurement preference of 20% will be applicable to a domestic
supplier of the same capital good.
5.5. Appendix-C contains directives and methodology for steelmaking
CPSEs to procure from indigenous technology suppliers.
5.6. The policy shall apply to projects and non-projects where the total
procurement value of iron and steel products (Appendix-A) in a
contract is greater than Rs. 5 lakhs, on itemized basis.
5.7. No Global Tender Enquiry (GTE) shall be invited for tenders
related to the procurement of iron and steel products (Appendix-A
of the DMI&SP Policy). No Global Tender Enquiry (GTE) shall be
invited for tenders related to the procurement of Capital Goods for
manufacturing iron & steel products (Appendix-B of the DMI&SP
Policy) having estimated value up to Rs. 200 crore except with the
approval of competent authority as designated by Department of
Expenditure.
5.8. The policy applies to the purchase of iron & steel products by
private agencies for fulfilling an EPC contract and/or any other
requirement of a Ministry or Department of Government or their
PSUs.
6. Tender procedure for procurement
6.1. Procuring agencies shall follow standard government procurement
procedures while adhering to the DMI&SP policy.
6.2. The tender document, for procurement of both Goods as well as
for EPC contracts, should explicitly outline the qualification
criteria for adherence to the requirement as mentioned in
Appendix A and Appendix B.
6.3. All bidders – including manufacturers, selling agents, authorized
distributors, authorized dealers, and authorized supply houses –
shall submit Form-1 as part of their bid, irrespective of whether
they are the manufacturer or otherwise.
6.4. Bidders who are selling agents/authorized distributors/authorized
dealers/authorized supply houses of the domestic manufacturers of
iron & steel products, covered by Appendix-A, are eligible to bid
with self-certification on behalf of the domestic manufacturers
under the policy, subject to the bidder furnishing an authorization
certificate issued by the domestic manufacturer at the time of
delivery.
6.5. For products covered under Appendix B of the DMI&SP policy,
the bidder shall furnish certification issued by the statutory auditor
or cost auditor of the company (in the case of companies) or from
a practicing cost accountant or practicing chartered accountant (in
respect of suppliers other than companies) declaring that the capital
goods to be used in iron & steel industry are domestically
manufactured in terms of the domestic value addition prescribed.
6.6. If Indian suppliers of an item are not allowed to participate and/ or
compete in procurement by any foreign government, due to
restrictive tender conditions which have direct or indirect effect of
barring Indian companies such as registration in the procuring
country, execution of projects of specific value in the procuring
country etc., it shall provide such details to the procuring entities
for appropriate reciprocal action.
6.7. Entities of countries that have been identified by the Ministry of
Steel as not allowing Indian companies to participate in their
Government procurement for any item related to the Ministry of
Steel shall not be allowed to participate in Government
procurement in India for all items related to Ministry of Steel,
except for the list of items published by Ministry of Steel
permitting their participation.
6.8. The stipulation above shall be part of all tenders including those
on GeM portal invited by the Central Government procuring
entities.
6.9. In case restrictive or discriminatory conditions against domestic
suppliers are included in bid documents, an inquiry shall be
conducted by the Administrative Department undertaking the
procurement (including procurement by any entity under its
administrative control) to fix responsibility for the same.
Thereafter, appropriate action, administrative or otherwise, shall
be taken against erring officials of procurement entities under
relevant provisions. Intimation on all such action shall be sent to
the Standing Committee under the DMI&SP policy.
6.10. A supplier debarred by any procuring entity for violation of this
Order shall not be eligible for preference under this Order for
procurement by any other procuring entity for the duration of the
debarment. The debarment for such other procuring entities shall
take effect prospectively from the date on which it comes to the
notice of other procurement entities.
6.11. In case, the matter is referred to the Ministry of Steel, the
grievance redressal committee set up under the MoS shall dispose
of the complaint within 4 weeks of its reference and receipt of all
documents from the bidder after taking into consideration, the
view of the Government Agency. The bidder shall be required to
furnish the necessary documentation in support of domestic value
addition claimed in iron & steel products to the grievance redressal
committee under MoS within 2 weeks of the reference of the
matter.
6.12. Procuring agency shall define the penalties, in case of a wrong
declaration by the bidder of the prescribed domestic value
addition, in the tender document. The penalties may include
forfeiting of the EMD, other financial penalties, and blacklisting
of such manufacturer/service provider etc., in terms of extant
rules.
7. Implementation monitoring by the Ministry of Steel
7.1. The policy provisions shall be applicable for 5 years from the date
of publication and may further be extended at the discretion of the
Ministry of Steel.
7.2. MoS shall be the nodal ministry to monitor the implementation of the policy.
7.3. Agencies covered under DMI&SP policy shall send declaration on
a quarterly basis indicating the extent of compliance to the policy
and reasons for non-compliance thereof, during the preceding
financial year.
Appendix-A
List of iron and steel products which can only be procured from domestic sources
| Sl. No | Iron & Steel Products | HS Code | Condition |
|---|---|---|---|
| 1 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot rolled, not clad, plated or coated | 7208 | Melt & Pour |
| 2 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold rolled (cold-reduced), not clad, plated or coated | 7209 | Melt & Pour |
| 3 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated | 7210 | Melt & Pour |
| 4 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated | 7211 | Melt & Pour |
| 5 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated | 7212 | Melt & Pour |
| 6 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel | 7213 | Melt & Pour |
| 7 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot rolled, hot-drawn or hot-extruded, but including those twisted after rolling | 7214 | Melt & Pour |
| 8 | Other bars and rods of iron or non-alloy steel | 7215 | Melt & Pour |
| 9 | Angles, shapes and sections of iron or non-alloy steel | 7216 | Melt & Pour |
| 10 | Wire of iron or non-alloy steel | 7217 | Melt & Pour |
| 11 | Flat-rolled products of stainless steel, of a width of 600 mm or more | 7219 | Melt & Pour |
| 12 | Flat-rolled products of stainless steel, of a width of less than 600 mm | 7220 | Melt & Pour |
| 13 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel | 7222 | Melt & Pour |
| 14 | Wire of other alloy steel | 7229 | Melt & Pour |
| 15 | Rails, railway or tramway track construction material of iron or steel | 7302 | 50% Domestic Value Addition |
|---|---|---|---|
| 16 | Tubes, pipes and hollow profiles, of cast iron | 7303 | 50% Domestic Value Addition |
| 17 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel | 7304 | 50% Domestic Value Addition |
| 18 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel | 7305 | 50% Domestic Value Addition |
| 19 | Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel | 7306 | 50% Domestic Value Addition |
| 20 | Tube or pipe fittings (for example, connectors/couplings, elbow sleeves), of iron or steel | 7307 | 50% Domestic Value Addition |
| 21 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | 7221 | Melt & Pour |
| 22 | Wire of stainless steel | 7223 | Melt & Pour |
| 23 | Flat-rolled products of other alloy steel, of a width of 600 mm or more, including electrical steel | 7225 | Melt & Pour |
| 24 | Flat-rolled products of other alloy steel, of a width of less than 600 mm, including electrical steel | 7226 | Melt & Pour |
| 25 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel | 7227 | Melt & Pour |
| 26 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | 7228 | Melt & Pour |
| 27 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel | 7301 | 50% Domestic Value Addition |
| 28 | Structures (excluding prefabricated buildings of heading 9406) and parts of structures | 7308 | 50% Domestic Value Addition |
| 29 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 whether or not lined or heat insulated, but not fitted with mechanical or Thermal equipment | 7309 | 50% Domestic Value Addition |
| 30 | Tanks, casks, drums, cans, boxes and similar containers, for any material(other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300L,whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | 7310 | 50% Domestic Value Addition |
| 31 | Containers for compressed or liquefied gas, of iron or steel | 7311 | 50% Domestic Value Addition |
| 32 | Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated | 7312 | 50% Domestic Value Addition |
| 33 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel | 7313 | 50% Domestic Value Addition |
| 34 | Grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel | 7314 | 50% Domestic Value Addition |
| 35 | Chain and parts thereof, of iron or steel | 7315 | 50% Domestic Value Addition |
| 36 | Anchors, grapnels and parts thereof, of iron or steel | | | 7316 | 50% Domestic Value Addition |
|---|---|---|---|---|---|
| 37 | Articles of iron and steel | | | 7317 | 50% Domestic Value Addition |
| 38 | Articles of iron and steel | | | 7318 | 50% Domestic Value Addition |
| 39 | Articles of iron and steel | | | 7319 | 50% Domestic Value Addition |
| 40 | Springs and leaves for springs, of iron or steel | | | 7320 | 50% Domestic Value Addition |
| 41 | Stoves,ranges,grates,cookers(including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non- electric domestic appliances, and parts thereof, of iron or steel | | | 7321 | 50% Domestic Value Addition |
| 42 | Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors, not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel | | | 7322 | 50% Domestic Value Addition |
| 43 | Tables and similar house hold articles and parts thereof, of iron or steel | | | 7323 | 50% Domestic Value Addition |
| 44 | Sanitary ware and parts thereof, of iron or steel | | | 7324 | 50% Domestic Value Addition |
| 45 | Other cast articles of iron or steel | | | 7325 | 50% Domestic Value Addition |
| 46 | Electrical steel and other articles of iron or steel | | | 7326 | 50% Domestic Value Addition |
| 47 | | Railway or tramway passenger coaches, not self- | | 8605 | 50% Domestic Value Addition |
| | | propelled | | | |
| 48 | Railway or tramway goods vans and wagons, not self- propelled | | | 8606 | 50% Domestic Value Addition |
| 49 | | Parts of railway or tramway locomotives or rolling- | | 8607 | 50% Domestic Value Addition |
| | | stock; such as bogies, | bissel-bogies, axles and forged | | |
| | | wheels, and parts thereof | | | |
Appendix- B
List of Capital Goods (non-exhaustive) which can be imported for Manufacturing Iron & Steel
products, and minimum domestic content applicable for the package
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| Mining | | | |
| 1 | Equipment for Mining development • Crushing & Screening Plant • Mineral beneficiation (iron ore and coal) plant; (Boundary Limit: from Receiving of ROM at the crusher hopper, comminution, segregation, ore/coal processing up to final product preparation) • Slime Beneficiation • Automatic Loading facilities • Conveyer system | 75% | • Wet High Intensity Magnetic Separator / High Gradient Magnetic Separator • Heavy Media Cyclone • Gyratory Crusher • Spiral Concentrator • Online Ash Analyzer • Ball/Rod/AG Mill (Greater than 3.5 m dia) |
| 2 | Mining transportation • Slurry Pipelines • Long distance conveying system | 30% | • PD Pump • Valves • Specialized/rope/pipe conveyor |
| 3 | Other Mining Machinery & Heavy Earth Moving equipment for mines (Boundary Limit: Equipment for drilling, raising, lading, haulage, and mine preparation) | Not Applicable | • Dumper (above 220 tons pay load capacity), Hydraulic Excavators (above 9 Cubic meter bucket capacity) • Blast Hole Drills 10"(Electric/Diesel) • Diesel driven Track Dozer >850 HP Capacity • Diesel Driven Wheel Dozer >500 HP capacity • Diesel driven Front End Wheel Loader >8 Cubic Meter bucket Capacity |
| 4 | Pellet Plant Equipment (Boundary Limit – Receiving Ground Hopper for flux & Binder, Belt Conveyor feeding IOF to product pellet belt conveyor) | 85% | • Pellet car, High Intensive Mixer, Balling Discs, Vertical roller mill, Drive/discharge end Sprocket assembly, curved rail, Slide rails, Single deck roller screen and Double deck roller screen, Induration Machine Drive assembly, Level-2 automation |
| Iron/steel making | | | |
| 5 | Raw Material Handling System (Boundary Limit – from Wagon Tippler to respective user units) | 95% | • Barrel Couplings, Heavy Duty Bearings, Crane Rail Lubrication System, Slew Ring Bearings, Tongs (Special), Vibration Isolation System (Spring Damper), Hydraulic motor & hydraulic pump (installed in wagon tippler, side arm charger, stacker cum reclaimer, slew stacker), electronic cards, unbalanced motor, cam limit switch of wagon tippler. |
| 6 | Coke Oven Battery (Both top charged & stamp charged) (From Coal bunker to coke discharge bucket) | 90% | • Springs of the anchorage systems, COG booster, stamping train, bonding press |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| 7 | Coke Dry Quenching Plant (From Hot coke receiving bucket to discharge chute of cooling chamber) | 90% | • Mill fan & Motor, Special Refractory for Twin Flue of Cooling Chamber. |
| 8 | By-Product Plant (From Primary Gas cooler to clean coke oven gas up to the network) | 90% | • Exhauster & Motor, burner of the clause kiln, Catalyst, Tail gas analyzer, Palletization unit. |
| 9 | Sinter Plant Equipment (Boundary Limit – Receiving Bin for Raw Material to Vibro-Feeder below Product Sinter Bin) | 75% | • Highly Intensive Mixer & Granulator Unit, Pallet cars, Drive Sprocket, Main Drive with Gear Box of sinter machine, slide rail & curved rail, Hot Sinter breaker and Grizzly, Annular Dip Rail Cooler, LCI Drive system for Sinter Plant Exhauster application. • Ignition Furnace Spare parts (Refractory/Control System/Burner Assembly) • Exhauster (Waste Gas Fan) and System Spare Parts |
| 10 | Blast Furnace Equipment Boundary Limit: Input • Raw material- Top of bunkers of respective material • Cold Blast- Inlet of the snort valve • Industrial water- BF pump house Output • Hot Metal- Filled in the torpedo ladle • Granulated Slag - to the granulated slag yard | 70% | • Bell less top gear box, upper seal device covering upper material gate and upper seal valve, lower seal device covering lower material gate and lower seal valve, Bleeder valve, Tilting Rocker, Wear liners, Goggle Valve, Equalizing & Relief Valve, Chute Rotation Motors, Distribution chute, Feeder spout, Chutes & Funnels etc. • Hearth Refractory (carbon blocks) • Top Recovery Turbine system (TRT) • Cu-staves • SGI Staves • Cast house equipment (Mud gun, Drilling machine and main trough Manipulator) • Probes, Profilometer & Stock level indicator (radar type) • Gas cleaning plant (AGS system) • Stove system – ceramic burner & technological valve • Waste Heat Recovery system • Turbo blowers • Ball Mill • PCI Injection System • Level-II automation • Copper plate coolers • Tuyere cooler • Stove technological valves • Dewatering Wheel of SGP • Torpedo Ladle Car chain assembly • Dome filled dump Valves • Tuyere stock assembly |
| 11 | Gas based Direct Reduction Plant Equipment (Boundary Limit: Receipt of raw | 50% | • Reactor charging system • Reactor • Reactor discharging system |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| | material at the top of the DRI reactor & discharge of hot DRI to EAF) | | • Pneumatic transfer to EAF • Discharge route to briquetting system • Briquetting feeding system • Briquetting system • Reduction gas circuit • CO2 removal unit • Process gas heater • Reformer system • Heat Recovery System • Process Gas Compressors • Blowers • Seal Gas System • Flue Gas Fan/ Hot Fan • Process valves • Critical bellows • Critical refractories • Natural Gas pre-treatment system • Level-II automation |
| 12 | Oxygen Plant 700 tpd & Above (Boundary limit: Water, Power at oxygen plant boundary) | 30% | • Main Air Compressor • Booster Air Compressor • Expansion Turbine • Reboiler • Cryogenic Pumps • Heat exchange elements of • ASU • Pressure Column • Main Condenser, Low Pressure Column • Crude Argon Column, Pure Argon Column and Condenser with Condenser Block • Main Heat Exchangers, Pure Argon Evaporator Sub-cooler • LOX-IC-Process Pump • LIN-IC-Process Pumps • LAR-Transfer -Process Pumps • Dense Fluid Expander • Booster Heat Exchangers • Molecular Sieves Switching Valves for PPU • Critical Safety valves • Specialized valves • Control Valves • Cold box • Control Valves GOX-Product • Flow Measuring devices of Cold box • Expander - Brake Generator, Frequency Converters |
| 13 | Steel Processing | | |
| 13.1 | Hot Metal De- De-Sulphurization Station (HMDS) Unit with Co- Injection Process (Hot metal from the blast furnace (BF) is | 75% | • Injection Lance and automatic sampling Unit with auxiliaries • De-slagging Machines (slag raking machine) with auxiliaries |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| | received in a torpedo ladle or open-top ladle, undergoes desulfurization treatment to reduce “Sulphur (S)” content, and is then transferred to the BOF converter) | | • Temp. measuring and sampling device with auxiliaries |
| 13.2 | Hot Metal De- De-Sulphurization Station (HMDS) Unit with Mechanical Stirrer (KR) Process (Hot metal from the blast furnace (BF) is received in a torpedo ladle or open-top ladle, undergoes desulfurization treatment to reduce “Sulphur (S)” content, and is then transferred to the BOF converter) | 70% | • Impeller, Impeller lifting & stirring equipment, Guide Frame with auxiliaries • De-slagging Machines (slag raking machine) with auxiliary facilities • Temp. measuring and sampling device with auxiliaries |
| 13.3 | Basic Oxygen Furnace / LD Unit [Treated hot metal is poured into the BOF converter, where it undergoes processing to convert it into steel, which is then supplied to the ladle furnace (LF)] | 65% | • Lance body with clamping, Lance carriage, Lance guide, Lance hoist & trolley, Lance copper tips with auxiliaries. • Pneumatic motors for emergency tilting drive. • Bottom stirring system, valve station & rotary joint along with auxiliaries • Valve stations for oxygen/ argon/ nitrogen with auxiliaries • Sub-lance system with auxiliaries • Container lab with all auxiliaries. • Automatic gas coupling (auto coupler) with auxiliaries. • Converter wrecking machine. • Converter tap hole changing machine • Refractory monitoring (laser) machine. • Converter Shell parts, Suspension System, Rotary joint, Slag Stopper & its control valves • Converter Tilting Drive system & Suspension system, gearboxes & Motors, Pneumatic Motors & control valves, Position Encoders, Clutch system, Lubrication system components. • Ladle Transfer Car Rail Track System (A series type) & gearboxes, stirring couplings. • LOMAS Gas Analyzer, Multi-lab temperature & sample system. • Stirring couplings for ladle transfer Cars. • PLCs and RIOs. • Automation system and software. • Hot Zone Hydraulic Pumps and Valves. • Hot Zone Geared Motors with wheel block. • Converter Bearings. • Air & Electric operated Slurry Compaction Pump. • Primary ID fan, bearings, motors, drives & Lubrication system. |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| | | | • WDS-Cone |
| 13.4 | Electric Arc Furnace Unit (Primary materials such as scrap, DRI, pig iron, and hot metal in combination is converted into liquid steel using electrical energy to melt and refine the raw materials) | 70% | • Electrode regulation system with auxiliaries • High current system including furnace transformer • Oxygen & Carbon Injection System with auxiliaries • Manual Temp Measuring & sampling Lance with auxiliaries |
| 13.5 | Ladle Furnace Unit [Liquid steel is processed/ treated to achieve the desired grade and held as buffer stock before being supplied to the continuous casting machine (CCM)] | 70% | • Electrode regulation system with auxiliaries • Manual Temp Measuring & sampling Lance with auxiliaries. |
| 13.6 | RH/ RH-OB Unit [The liquid steel is degassed to achieve the required dissolved gas levels and then supplied to the continuous casting machine (CCM)] | 65% | • Gas Stirring System/ Lift Gas Stirring System Valve Stand with auxiliaries • Oxygen Lance System with auxiliaries • Hydris Measurement System with auxiliaries |
| 13.7 | Argon-Oxygen Decarburization (AOD) Unit | 70% | • Drive Unit for tilting of AOD converter, Air Motor, Brakes etc. • Lance copper tips • Hoses for water and oxygen • Pneumatic motors for emergency tilting drive. • Bearing for AOD Converter, Emergency Gears for air motor • Valve stations for oxygen/ argon/nitrogen with auxiliaries. • Refractory monitoring (laser) machine • Automation system. |
| 13.8 | VD/VOD | 70% | • Gas analysis (Off-Gas Mass Spectrometers) only sensor. Holder is make in India • Automation and Process control software platform • Vacuum Pump System with Auxiliary • Oxygen tips • Valve stations for oxygen/ argon/nitrogen with auxiliaries. |
| 13.9 | Submerged Arc Furnace (SAF) Unit | 65% | • Clay gun and drill M/c • Electrode equipment • Slipping device assembly • Electrode guiding assembly • Upper & Lower mantle assembly • Pressure ring assembly • Contact shoe assembly • Heat shield assembly • Electrode seal assembly • Pressure ring bellows • Seal refractory • Furnace automation and Controller Software |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| 13.10 | Continuous Casting Unit (Slab Caster/ Billet/ Bloom Round/ Combi/ Beam Blank) [The liquid steel is cast into slabs, billets, or blooms in the continuous casting machine (CCM)] | 65% | • Ladle slag detection system completes with auxiliaries • Copper tube and Plate, Mould oscillation Cylinder. • Rotary Union. • Continuous temperature measuring system with auxiliaries. • Torch cutting machine/ Emergency torch cutter along with auxiliaries • De-burring machine along with electrical drive system with auxiliaries • Marking machine. • Roll gap checker completes with auxiliaries • Electromagnetic Stirrer (EMS)/ Electromagnetic Braking (EMBr) system along with auxiliaries |
| 14 | Flat Product Mills | | |
| 14.1 | Hot Strip Mills/ Plate Mill (Boundary Limit: Slab yard to Dispatch Bay, including auxiliaries) | 50% | • De-scalars, mill stand, bed plates, backup rolls, Work Rolls, mill spindles, chocks, AGC cylinders, bending blocks & cylinders, shears, down coilers, anti-friction roll neck bearings, oil film bearings, mill reducers, load cells, thickness gauge, profile gauge, width gauge, levelers, roll grinding machines, Coil Marking Machine, Plate Marking Machine, mill stand motors & mill stand MV drive system, automation system, etc. |
| 14.2 | CRM (PLTCM) (Boundary Limit: Pickling line entry to mill exit) | 50% | • Welding machine, tension leveler, mill stands, backup rolls, antifriction bearings, oil film bearings, roll chocks, roll force cylinders, roll bending and roll shifting cylinders, mill spindles, load cells, position transducers, Electrostatic Oiler, Side Trimmer, Steering System, Surface Inspection System, thickness gauges, laser speed gauge, tensiometer, Flatness Gauge, tension reel, mill reducers, mill stand motors & mill stand MV drive system, automation system etc. |
| 14.3 | CRM (HDGL) (Boundary Limit: entry to exit of HDGL including temper mill & tension leveler) | 60% | • Welding machine, radiant tube furnaces, jet cooling system, coating pot with induction heating, pot rolls, air knife wiping system, tension leveler, width gauge, thickness gauge, coating thickness gauge, load cells, roll force cylinders, mill stand motors & mill stand drive system, automation system, etc. |
| 14.4 | CRM (SPM) (Boundary Limit: entry to exit of SPM) | 50% | • Mill stands, backup rolls, antifriction bearings, oil film bearings, roll chocks, roll force cylinders, mill spindles, Electrostatic Oiler, Coil Marking System, load cells, thickness gauge, mill stand motors & mill |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| | | | stand MV drive system, automation system, etc. |
| 14.5 | CRM (Bell Annealing Furnace) (Boundary Limit: From furnace bases to post cooling equipment) | 55% | • Furnace, automation system, etc. |
| 14.6 | CRM (Color Coating Line) (Boundary Limit: Entry to exit of CCL) | 80% | • Coater, Coating thickness gauge, digital printer, tension leveler, automation, etc. |
| 14.7 | TSCDR (Thin Slab casting Direct Rolling) (Boundary Limit: From turret to coil finishing & packaging area) | 50% | • Ladle slag detection system complete with auxiliaries • Copper tube and Plate, Mould oscillation Cylinder. • Rotary Union. • Continuous temperature measuring system with auxiliaries. • Pendulum shear cutting machine. • Segments assembly • Roll gap checker complete with auxiliaries • Electromagnetic Stirrer (EMS)/Electromagnetic Braking (EMBr) system along with auxiliaries, • Tunnel furnace burners • Roughing & Finishing Mill stands, work roll & backup rolls, antifriction bearings, oil film bearings, roll chocks, roll force cylinders, mill spindles, mill stand MV drive and motors, automation system, laminar/power cooling components, hydraulic coilers. Profile gauge, thickness gauge, width gauge. • Nozzles • Grease system and auxiliaries • Hydraulic system and auxiliaries • Gearbox • ROT roll assembly • Roll assembly (Sleeve, Shaft, Roll) • Ladle turret and auxiliaries (Slew bearing, Disc coupling, Gearbox, Hydraulic clutch and Hydraulic Cylinder) • Mould breakout prediction system • Auto mould level control nucleonic gauge • Mould powder feeding system • CNC mould machining system with auxiliaries • Tundish and Turret weighing system • Tunnel furnace refractory rolls. • Tunnel furnace shuttle drive system and gas conveying system. • Backup roll hydrostatic lubrication system • Roll bite lubrication system • In-furnace camera with auxiliaries • Crop shear • Descaler system and component. • Coil marking machine |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| | | | • Online Coil weighing system • Cut to Length Stacker System • Roll Shop (CNC Combi grinders, CNC Roll Grinders, CNC Knife Grinders, CNC Turing Machine, Lathe Machines) • Coil Strapping machines • Down coiler system • Mill Measuring system and Sensors (Automatic gauge control (AGC) sensors (roll force, gap, pressure) • Looper Control System along its sensors • Condition based monitoring System and its sensors • Coil shuttle car and pallet conveying system. • Crane coil tong. • RO and UF membranes • Self-cleaning filters |
| 14.8 | Normalizing Facilities for Plate Mill (Boundary Limit: entry to Normalizing furnace to dispatch of finished plates) | 50% | • Furnace burners, Furnace hearth rollers, leveler, load cell, automation |
| 14.9 | SSM (Silicon Steel Mill) (Boundary Limit: Pickling line entry to dispatch of SSM) | 50% | • Mill stand, work roll & backup roll, antifriction bearings, oil film bearings, roll chocks, roll force cylinders, mill spindles, mill stand MV drive system & motors, automation system, annealing furnace, decarburizing line, electrical steel testing facilities (e.g. Fischer scope thickness measuring device, Frankline Insulation Resistivity Tester, Magnetic Console, Stacking Factor tester). |
| 14.10 | CRM (Cluster Mill stand) Sendzimir Mill (Boundary Limit: entry to exit of Sendzimir Mill) | 50% | • Sendzimir Mill stand, work roll & backup rolls, antifriction bearings, oil film bearings, roll chocks, roll force cylinders, mill spindles, mill stand MV drive system & motors, automation system |
| 14.11 | HRM (Steckel Mill) (Boundary Limit: From coiler furnace entry to Steckel Mill and exit to coiler furnace) | 40% | • Steckel Mill stand, heated coilers, work roll & backup rolls, antifriction bearings, oil film bearings, roll chocks, roll force cylinders, mill spindles, mill stand MV drive system & motors, automation system |
| 15 | Long Product Mills | | |
| 15.1 | Bar Mill/ WRM/MM/ LSM (Boundary Limit: From furnace entry to dispatch) | 75% | • Fast finishing blocks, Roll turning lathes, Profile Gauge, automation systems, etc. |
| 15.2 | Rail Mill/ Heavy Structural Mill (Boundary Limit: From furnace entry to exit of the rail welding plant excluding material handling) | 45% | • Mill stands, mill motor & drive system, heat treatment facility, straightening machine, NDT facilities, welding machine, Profile Gauge, Hot Saw, Cold Saw, Hot Marking Machine, Roll Turning Lathe, Saw Grinding Machine, automation system, etc. |
| 15.3 | ERWPP (Electrical Resistance Welded Pipe Plant) | 50% | • Pre-forming Unit, Break-Down Stand, Edge Bender, Universal Cage, Finishing Pass |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| | (Boundary Limit: From strip feeding to finishing facilities and dispatch of ERWPP) | | (multiple stands), Pipe Guide, high frequency welding machine, high power electric inductors, hydro testing, ultrasonic machine |
| 15.4 | SWPP (Spiral Welded Pipe Plant) (Boundary Limit: From pipe forming to finishing facilities and dispatch of SWPP) | 50% | • Submerged arc welding, outside welding (skelp joint), X-ray station, hydro testing, beveling machine, ultrasonic machine, end radiograph station |
| 16 | Wheel Plant | | |
| 16.1 | Wheel Plant (receipt of round/ingot to finished wheel) | 30% | • Circular saw, forging press, wheel rolling mill, wheel dishing press, wheel stamping machine, rim spaying machine, mobile chargers, (Handling Robots), machining facilities, testing facilities, automation system etc. |
| 16.2 | Heat Treatment Facilities for Railway Wheels (Boundary Limit: exit of Hot Dimension Measurement to Black Wheel Storage) | 40% | • Furnace burners, hearth rollers, automatic wheel handling and quenching machine |
| 16.3 | Non-Destructive Testing (NDT) Facilities for Wheels and Rails (Boundary Limit: entry & exit of NDT facilities) | 30% | • Hardness testing machine, Ultrasonic testing machine, Magnetic particle inspection machine, Eddy current testing machine |
| 16.4 | Facilities for Manufacturing of Forged Rolls for Rolling Mill Stands (Boundary Limit: entry of forged blank roll to dispatch of finished rolls) | 30% | • Forging Press, Manipulators, roll hardening machine, Cryogenic treatment facilities, tempering furnaces, roll grinders, roll turning lathes, hardness testing machine, ultrasonic testing machine |
| 16.5 | RGBS/ Roll Shop | 50% | • CNC work roll grinder/CNC combi grinder, CNC Roll turning lathe, • Facilities for Electric Discharge Texturing (EDT) and Electro Discharge Machining (EDM) for rolls |
| 17 | Refractory Brick (Receipt of raw material to finished brick) | 50% | • Hydraulic Press |
| 18 | Electrical (Power Quality System) | 30% | • MVSTATCOM • (Static Synchronous Compensator) System |
| Other auxiliary and utility equipment | | | |
| 19 | Calcination Plant (Calcined Lime & Dolo) | | • Firing system, Shaft level indicator, Automation system • VFD & Soft Starter Cards. Driving Air Blower, Dedusting Draft Fans, Cooling Air Fans, Lime Cooling Fan, Waste Gas Fans, Gas Booster Fan assembly • Hyd. Cylinders, Hyd. Motors, Hyd. Station. |
| 20 | Electric Motor Driven Cold Blast Blower (Axial/Axial with last stage radial) | | • Axial/ Axial with last stage radial Blower • Motor with Drive System • Blow-off Valve • Blower non-return valve • Control & Instrumentation items |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| 21 | Steam Turbine Driven Cold Blast Blower (Axial/Axial with last stage radial) | | • Axial/ Axial with last stage radial Blower • Blow-off Valve • Blower non-return valve • Control & Instrumentation items |
| 22 | Diesel Engine Driven Cold Blast Blower (Axial/Axial with last stage radial/radial) | | • Axial/ Axial with last stage radial Blower/radial Blower and Systems • Diesel Engines • Blow-off Valves • Blower non-return valves • Control & Instrumentation items |
| 23 | Gas Fired/ Heat Recovery Boilers | | • Special Grade Plates & Tubes • Flame Scanner • Instrumentation & controls |
| 24 | Steam Turbine (Extraction/ BPTG) | | • Special Grade Blade Material • Governing System • Turbo Supervisory system • Instrumentation & controls |
| 25 | Gas Holder | | • Gasholder seal, sealant. • Level weight ropes with fittings. • V. R. Valve gaskets • Specialized membranes for double/triple membrane system. • Hydraulics |
| 26 | High pressure gas boosters (Outlet pressure > 2000 mm WC) | | • Gas booster proper including control and bypass valves • Piston Rings • Concentric Ring Type Valves (SS) |
| 27 | Pollution Control Systems | | • TR sets • Controllers • Insulators • ESP electrical components • Control & Instrumentation items |
| 28 | Water & Effluent Treatment System | | • Membranes • Evaporators (Compressor & Titanium Sheet) • HP Pumps • Control & Instrumentation items |
| 29 | Compressed Air Station | | • Centrifugal Compressor core assembly including Impellors, Bull Gear, Pinion Shafts, Bearings, Vibration Probes and Local Control Panel. |
| 30 | Hydrogen Plant | | • Electrolyser unit • HP Compressors • Control & Instrumentation items |
| 31 | Packaged Chillers | | • Compressors • Control & Instrumentation items |
| 32 | Other Utility areas like– Air conditioning & ventilation system, VAM based chiller system, firefighting system, gas boosters (DP less than 2000 mm WC), cooling water system (pumping station, filters, cooling | | • Items / Equipment have sub-components / parts which are imported • Compressors, Chillers, Crane AC units, Expansion Valve, Instruments, High Temperature Application AC. |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| | towers, heat exchangers, etc.), gas mixing stations, pollution control systems, inter plant piping system | | |
| 33 | Electric overhead travelling crane and gantry crane, electric hoist | | • Barrel coupling, heavy duty bearing, crane rail lubrication, slew ring bearings, tongs |
| 34 | Engineering shop | | • CNC lathe, CNC milling machine |
| 35 | Power Generation, transmission & Distribution system; Shop Electrics including Power & control system and associated electrical works | As per Minimum local content (MLC) % guideline of Ministry of Power | |
| Note: All equipment shall be procured/ complied as per the Class-I category of the Ministry of Power guidelines. In case(s) where the equipment is not mentioned in Class-I category, or where classification/specification of the equipment is not explicitly or clearly defined under the Ministry of Power guidelines, the provisions issued by DPIIT for Class-I and Class-II categories shall accordingly be followed. | | | |
| 36 | Instrumentation items/ equipment ** | As per DPIIT guideline * | • Above / under burden probe system • Profilometer • Burden camera • Tuyere phenomena detection system (TPDS) • Top gas analyzers (CO, CO₂, H₂, O₂, pollutants) • Flow jam switch • Elemental analyzers • Moisture analyzer (Nucleonic) • CV analyzer • Thickness gauge • Hot metal detector • Width gauge • Furnace camera • Multifunction profile gauge • Flatness/shape gauge • Surface inspection system • Laser doppler velocity meter • Optical barrier • Thermal imaging systems for hot rolling • Automatic gauge control (AGC) sensors (roll force, gap, pressure) • Online mechanical property prediction systems (AI + sensors) • Oil film thickness monitoring systems (cold rolling) • X-Ray or Nucleonic Based Coating Thickness Gauges • Mass flow meter • Hydris (hydrogen detection in molten steel) • Mold level measurement • Break-Out Prediction System (BOPS) • Electromagnetic Brake (EMBr) Control & Sensors • Ladle tracking and management system • Slag Detection System (SDS)/ Slag Monitoring Systems |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| | | | • BOF Endpoint Detection (Laser-Induced Breakdown Spectroscopy – LIBS) • Sub-Lance Systems (Temp + O₂ + Carbon + Sampling) • Ladle Refractory Wear Monitoring (Laser/Ultrasonic/Infrared) • Continuous Emissions Monitoring Systems (CEMS – imported analyzers for SOx, NOx, PM, CO, CO₂, O₂, H2) • Off-gas analyzer for BOF/ EAF (CO, CO₂, H₂, dust) • Water quality analyzers (pH, Conductivity, Oil-in-water, TOC, Silica, BOD, COD, TSS, TDS, Phenol, Cyanide) • Laser-based gas leak detectors (CH₄, CO, H₂, H2S) • Acoustic / ultrasonic leak detection • Vibration / condition monitoring sensors / Axial shift / Differential expansion monitoring systems • Anti-collision system (Radar/ Laser/ Lidar) • Oven Identification System (OIS) • Pyrometers • LOMAS Analyzers • Master calibrators for pressure, temperature and electrotechnical parameters • Instruments installed in Eirich Mixers in Sinter plant, and Hanzel make lubrication systems. • Governor systems for Turbines and Turbo- blowers • Tail gas analyzers for By-product plant • Force sensors used in Coke bucket Lifter & reversing winch • Encoders, • Hydraulic valve controllers • Instruments installed in BLTs (Tilt switch, sonic sensor, encoders, etc.) • Flame sensors/scanners |
| 37 | Automation items/ equipment ** | As per DPIIT guideline * | |
| 38 | Voice Communication system ** | As per DPIIT guideline * | |
| 39 | Fire Detection and Alarm (FDA) system ** | As per DPIIT guideline * | |
| 40 | CCTV system ** | As per DPIIT guideline * | |
| S. No. | Plant /Unit package | Minimum domestic content of Capital Goods (%) | Importable Items |
|---|---|---|---|
| Note: * Instrumentation, automation, communication equipment, Fire Detection & Alarm (FDA) system, and CCTV system shall comply with the domestic content requirements for capital goods in line with Class-I and Class-II supplier norms as per DPIIT as well as MEITY guidelines. ** Highly specialized equipment, components, and critical parts such as semiconductor chips for instrumentation, automation, communication systems, fire detection & alarm (FDA) systems, and CCTV systems are currently being sourced from global technology leaders. However, the overall system assembly, integration, and manufacturing activities are being carried out in India, with the remaining components procured through domestic sources. | | | |
Appendix-C
Promotion of Indigenous Technologies in Iron & Steel Sector
1) Objective:
To promote self-reliance in the Indian iron and steel sector by incentivizing the adoption,
development, and scale-up of indigenous technologies across all stages of steel
manufacturing.
2) Scope:
This policy applies to Central Public Sector Enterprises involved in steelmaking or putting
up a steel manufacturing plant.
3) Policy Directives:
3.1 In cases where technology and proof for earlier engineering & supply is available but does
not match the present capacity requirement, following conditions will be applicable for
indigenous technology providers:
3.1.1 Production capacity reference to be 30% of the capacity of the proposed plant.
3.1.2 Availability of demonstrable tie ups with the vendors.
3.1.3 Experience of detailed engineering of projects for at least 75% of the capacity of the
proposed plant.
3.2 In cases where technology is available but no reference for earlier supply is available,
following conditions will be applicable for indigenous technology providers:
3.2.1 The indigenous technology supplier has done detailed engineering of projects
matching at least 75% of the features of the proposed project.
3.2.2 The indigenous technology supplier has done detailed engineering matching 100%
of the critical features of the proposed project.
3.2.3 Availability of demonstrable tie ups with the vendors.
3.2.4 Demonstrable evidence of technology availability (IPR or other sufficient evidence).
3.3 In cases where no Indian technology is available, a foreign technology supplier committing
to transfer technology, including training and handholding to an Indian CPSE (including
the procuring entity), within three years, shall be considered as deemed Class-I supplier
irrespective of percentage of Domestic Value Addition. In this case, purchase preference
shall be given to the foreign technology supplier as defined in DPIIT’s Public Procurement
(Preference to Make in India) Order amended from time to time.
4) Implementation Oversight:
The Standing Committee constituted by Ministry of Steel shall monitor implementation,
resolve disputes, and update the eligibility and incentive criteria periodically.
Form-1
Affidavit of Self-Certification for Compliance with Melt & Pour
Requirements (Appendix-A) and/or Domestic Value Addition
Requirements (Appendix-A & Appendix-B*)
*For Appendix-B capital goods, this affidavit must accompany the
statutory auditor’s / cost auditor’s / CA certificate, as mandated under the
policy.
I, ______________, Resident of ________________, being the authorised
signatory of M/s ____________,
do hereby solemnly affirm and declare as under:
1. I have read and understood the Domestically Manufactured Iron & Steel Products
(DMI&SP) Policy, 2025, issued vide Notification No. _____________ dated
____________. I agree to abide by all terms and conditions of the said policy and
the tender in which this affidavit is submitted.
2. This affidavit pertains to the following iron & steel product(s)/capital good(s):
Name of product(s): __________________________________
HS Code(s): _________________________________________
Appendix classification: Appendix-A / Appendix-B (select as applicable)
Procuring agency: ____________________________________
3. Melt & Pour - Applicable only for Appendix-A items with Melt & Pour condition
I hereby declare that the above product(s) satisfy the Melt & Pour in India
requirement as notified in Appendix-A. Specifically:
The steel was melted and poured in India.
The first solid shape (slab/billet/ingot/other) was produced at the following
location(s):
Steelmaking facility: ___________Location: ____________ Heat numbers; Batch
details: ______________
I undertake to produce mill test certificates, heat records, and any other
documentary proof to substantiate this declaration whenever required by the
procuring agency.
(If not applicable, write “Not Applicable”.)
4. Domestic Value Addition - Applicable for Appendix-A DVA items and
Appendix-B capital goods:
I hereby declare that the Domestic Value Addition (DVA) for the product(s) is:
______ %. The DVA has been computed as per DPIIT guidelines and the formula
specified in the DMI&SP Policy, 2025.
4A. For Appendix-B Capital Goods (Mandatory): A certificate issued by the
statutory auditor / cost auditor / chartered accountant is enclosed herewith,
confirming the DVA of the capital good package in accordance with the policy.
(If Appendix-A item only, strike this clause out.)
5. I confirm that: All information furnished is true and correct. All input steel costs,
imported content, and domestic content calculations have been verified. All
manufacturing, purchase, and pricing records are available for examination.
If any information is found incorrect or misleading: The procuring agency may
disqualify me / my firm from Government tenders as per the procuring agency
norms. I agree to pay all assessment costs and penalties, including forfeiture of
EMD, as per policy and tender conditions.
6. I undertake to maintain the relevant records, and make them available to any
statutory authority.
7. Declaration: I do hereby declare that the statements made above are true to the
best of my knowledge and belief. I understand that any misrepresentation shall
attract penalties under the DMI&SP Policy, applicable laws, and tender conditions.
For and on behalf of
(Place & Date)
M/s _________________________________________________
(Authorised Signatory)
[F. No. 8(2)/2023-ID-I]
ABHIJIT NARENDRA, Jt. Secy.
and Published by the Controller of Publications, Delhi-110054. SARVESH KUMAR
KUMAR SRIVASTAVA
Date: 2025.12.18 23:38:47
+05'30'
SRIVASTAVA
Login to read full text