In pursuance of Sub rule (1) of Rule (15) of the Bureau of Indian Standards Rules 2018 the Bureau of Indian Standards

CG-DL-E-18072025-264779 EXTRAORDINARY PART III—Section 4 4787 GI/2025 (1) BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 14th July, 2025. Ref: HQ-PUB013/1/2020-PUB-BIS (1289)—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE | Sl. No. | No., Year & Title of the Indian Standards Established | Date of Establishment | No. , Year & Title of the Indian Standards to be Withdrawn, if any | Date of Withdrawal | |---|---|---|---|---| | (1) | (2) | (3) | (4) | (5) | | 1 | IS 446 : 2025 ISO 2398 : 2016 Rubber Hoses, Textile-Reinforced, for Compressed Air — Specification (Sixth Revision) | 10 July 2025 | IS 446 : 2017 ISO 2398 : 2006 Rubber Hoses, Textile- Reinforced, for Compressed Air — Specification (Fifth Revision) | 10 January 2026 | | 2 | IS 514 : 2025 Textiles — Mercerized Cotton Fabrics for Covering Aircrafts and Gliders — Specification (Fourth Revision) | 10 July 2025 | IS 514 : 1992 Textiles — Mercerized Cotton Fabrics for Covering Aircrafts and Gliders — Specification (Third Revision) | 10 January 2026 | | 3 | IS 1350 (Part 4/Sec 2) : 2025 Coal and Coke — Methods of Test Part 4 Ultimate Analysis Section 2 Determination of Nitrogen (Second Revision) | 10 July 2025 | IS 1350 (Part IV/Sec 2) – 1975 Methods of Test for Coal and Coke Part IV Ultimate Analysis Section 2 Determination of Nitrogen (First Revision) | 10 January 2026 | | 4 | IS 1448 (Part 6) : 2025 Petroleum and its Products — Methods of Test Part 6 Determination of Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Second Revision) | 10 July 2025 | IS 1448 [ P : 6 ] – 1984 Methods of Test for Petroleum and its Products [ P : 6 ] Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter Method (First Revision) | 10 January 2026 | | 5 | IS 1448 (Part 25/Sec 2) : 2025 ISO 3105 : 1994 Petroleum and its Products — Methods of Test Part 25 Glass Capillary Kinematic Viscometers Section 2 Specifications and Operating Instructions | 10 July 2025 | NA | NA | | 6 | IS 1448 (Part 55/Sec 1) : 2025 Petroleum and its Products — Methods of Test Part 55 Saponification Value Section 1 Colour Indicator and Potentiometric Titration (Second Revision) | 10 July 2025 | IS 1448 [P : 55/Sec 1] : 2004 Methods of Test for Petroleum and its Products [P : 55/Section 1] Determination of Saponification Value of Petroleum Products (First Revision) | 10 January 2026 | | 7 | IS 1448 (Part 87) : 2025 Petroleum and its Products — Methods of Test Part 87 Autoignition Temperature of Liquid Petroleum Products (First Revision) | 10 July 2025 | IS 1448 [ P : 87 ] – 1979 Methods of Test for Petroleum and its Products [ P : 87 ] Autoignition Temperature of Liquid Petroleum Products | 10 January 2026 | | 8 | IS 1448 (Part 101) : 2025 Petroleum and its Products — Methods of Test Part 101 Colorimetric Determination of Phosphorus in Lubricating Oils (First Revision) | 10 July 2025 | IS 1448 [ P : 101] – 1980 Methods of Test for Petroleum and its Products [P : 101] Colorimetric Determination of Phosphorus in Lubricating Oils | 10 January 2026 | |---|---|---|---|---| | 9 | IS 1448 (Part 111) : 2025 Petroleum and its Products — Methods of Test Part 111 Analysis of Liquefied Petroleum Gases (LPG) and Propylene Concentrates by Gas Chromatography (First Revision) | 10 July 2025 | IS 1448 [ P : 111] – 1983 Methods of Test for Petroleum and its Products [ P : 111 ] Analysis of Liquefied Petroleum Gases (LPG) and Propylene Concentrates by Gas Chromatography | 10 January 2026 | | 10 | IS 1448 (Part 198) : 2025 ISO 22854 : 2021 Petroleum and its Products — Methods of Test Part 198 Determination of Hydrocarbon Types and Oxygenates in Automotive-Motor Gasoline and in Ethanol (E85) Automotive Fuel — Multidimensional Gas Chromatography Method | 10 July 2025 | NA | NA | | 11 | IS 1448 (Part 202) : 2025 Petroleum and its Products — Methods of Test Part 202 Determination of Fatty Acid Methyl Esters in Biodiesel Blended Automotive Diesel/Paraffinic Diesel Fuels by High-Performance Liquid Chromatography — Refractive Index Detection | 10 July 2025 | NA | NA | | 12 | IS 1683 : 2025 Barytes for Rubber Industry — Specification (Third Revision) | 10 July 2025 | IS 1683 : 1994 Barytes for Rubber Industry — Specification (Second Revision) | 10 January 2026 | | 13 | IS 1684 : 2025 Red Oxide of Iron for Rubber Industry — Specification (Third Revision) | 10 July 2025 | IS 1684 : 1994 Red Oxide of Iron for Rubber Industry — Specification (Second Revision) | 10 January 2026 | | 14 | IS 1685 : 2025 Whiting for Rubber Industry — Specification (Second Revision) | 10 July 2025 | IS 1685 – 1975 Specification for Whiting for Rubber Industry (First Revision) | 10 January 2026 | | 15 | IS 1825 : 2025 Aluminium Alloy Milk Cans — Specification (Third Revision) | 10 July 2025 | IS 1825 – 1983 Specification for Aluminium Alloy Milk Cans (Second Revision) | 10 January 2026 | | 16 | IS 2342 : 2025 Manually Operated Milk Can Washer — Specification (First Revision) | 10 July 2025 | IS 2342 – 1963 Specification for Manually Operated Milk Can Washer | 10 January 2026 | |---|---|---|---|---| | 17 | IS 2415 : 2025 Cycle — Rubber Tubes (Moulded/Jointed) — Specification (Fifth Revision) | 10 July 2025 | IS 2415 : 2015 Cycle — Rubber Tubes (Moulded/Jointed) — Specification (Fourth Revision) | 10 January 2026 | | 18 | IS 3555 : 2025 Textiles — White Cotton Singlets, with Blue Welting — Specification (Second Revision) | 10 July 2025 | IS 3555 – 1983 Specification for Cotton Singlets, White with Blue Welting (First Revision) | 10 January 2026 | | 19 | IS 5382 : 2025 ISO 4633 : 2023 Rubber Seals — Joint Rings for Water Supply, Drainage and Sewerage Pipelines — Specification for Materials (Third Revision) | 10 July 2025 | IS 5382 : 2018 ISO 4633 : 2015 Rubber Seals — Joint Rings for Water Supply, Drainage and Sewerage Pipelines — Specification for Materials ( Second Revision) | 10 January 2026 | | 20 | IS 6684 : 2025 Milk Can Trolley — Specification (First Revision) | 10 July 2025 | IS 6684 – 1972 Specification for Milk Can Trolleys | 10 January 2026 | | 21 | IS 8193 : 2025 2-Nitro Chlorobenzene — Specification (First Revision) | 10 July 2025 | IS 8193 – 1976 Specification for 2-Nitro Chlorobenzene | 10 January 2026 | | 22 | IS 8194 : 2025 3-Nitro-Chlorobenzene — Specification (First Revision) | 10 July 2025 | IS 8194 – 1976 Specification for 3-Nitro Chlorobenzene | 10 January 2026 | | 23 | IS 8399 : 2025 1,3-Dinitrobenzene — Specification (First Revision) | 10 July 2025 | IS 8399 – 1976 Specification for 1,3- Dinitrobenzene | 10 January 2026 | | 24 | IS 8400 : 2025 2,4-Dinitro-chlorobenzene — Specification (First Revision) | 10 July 2025 | IS 8400 – 1976 Specification for 2,4-Dinitro Chlorobenzene | 10 January 2026 | | 25 | IS 8851 : 2025 Sulphur for Rubber Industry — Specification (Second Revision) | 10 July 2025 | IS 8851 : 1994 Sulphur for Rubber Industry — Specification (First Revision) | 10 January 2026 | | 26 | IS 8862 : 2025 Titanium Dioxide (Anatase Type) for Rubber Industry — Specification (First Revision) | 10 July 2025 | IS 8862 – 1978 Specification for Titanium Dioxide (Anatase Type) for Rubber Industry | 10 January 2026 | | 27 | IS 8874 : 2025 Dimethylamine, Technical — Specification (First Revision) | 10 July 2025 | IS 8874 – 1977 Specification for Dimethylamine, Technical | 10 January 2026 | |---|---|---|---|---| | 28 | IS 9407 : 2025 Light Magnesium Oxide for Rubber Industry — Specification (First Revision) | 10 July 2025 | IS 9407 – 1980 Specification for Light Magnesium Oxide for Rubber Industry | 10 January 2026 | | 29 | IS 9754 : 2025 High Density Polyethylene Containers for Packing of Liquid Pesticides (Up to 1 Litre Capacity) — Specification (First Revision) | 10 July 2025 | IS 9754 – 1981 Specification for High Density Polyethylene Containers for Packing of Liquid Pesticides ( Up to 1 Litre Capacity ) | 10 January 2026 | | 30 | IS 9949 : 2025 Abrasive Properties of Coal and Associated Minerals — Methods of Test (Second Revision) | 10 July 2025 | IS 9949 – 1986 Methods of Test for Abrasive Properties of Coal and Associated Minerals (First Revision) | 10 January 2026 | | 31 | IS 10142 : 2025 Polystyrene (Crystal and High Impact) for its Safe Use in Contact with Foodstuffs Pharmaceuticals and Drinking Water — Specification (Second Revision) | 10 July 2025 | IS 10142 : 1999 Polystyrene (Crystal and High Impact) for its Safe Use in Contact with Foodstuffs, Pharmaceuticals and Drinking Water — Specification (First Revision) | 10 January 2026 | | 32 | IS 11489 : 2025 Heavy Petroleum Stock (HPS) — Specification (First Revision) | 10 July 2025 | IS 11489 – 1985 Specification for Heavy Petroleum Stock (HPS) | 10 January 2026 | | 33 | IS 11711 : 2025 Criteria for Adoptability of Different Irrigation Methods — Recommendation (First Revision) | 10 July 2025 | IS 11711 – 1986 Recommended Criteria for Adoptability of Different Irrigation Methods | 10 January 2026 | | 34 | IS 11858 : 2025 Handle Grip for Power Tiller — Specification (First Revision) | 10 July 2025 | IS 11858 – 1986 Specification for Handle Grip for Power Tiller | 10 January 2026 | | 35 | IS 11905 : 2025 Shaft Assembly for Rotavator for Power Tiller — Specification (First Revision) | 10 July 2025 | IS 11905 – 1986 Specification for Shaft Assembly for Rotavator for Power Tiller | 10 January 2026 | | 36 | IS 12224 : 2025 Hydraulic Power and Lifting Capacity of Agricultural Tractors — Methods of Test (First Revision) | 10 July 2025 | IS 12224 – 1987 Method of Test for Hydraulic Power and Lifting Capacity of Agricultural Tractors | 10 January 2026 | |---|---|---|---|---| | 37 | IS 12770 : 2025 Coal for Cement Manufacture — Specification (First Revision) | 10 July 2025 | IS 12770 : 1989 Coal for Cement Manufacture — Specification | 10 January 2026 | | 38 | IS 13360 (Part 3/Sec 13) : 2025 ISO 16012 : 2015 Plastics — Methods of Testing Part 3 Physical and Dimensional Properties Section 13 Determination of Linear Dimensions of Test Specimens | 10 July 2025 | NA | NA | | 39 | IS 13360 (Part 5/Sec 5/Subsec 2) : 2025 ISO 179-2 : 2020 Plastics — Methods of Testing Part 5 Mechanical Properties Section 5 Determination of Charpy Impact Properties Sub-section 2 Instrumented Impact Test (Second Revision) | 10 July 2025 | IS 13360 (Part 5/Sec 5) : 2017 ISO 179-1 : 2010 Plastics — Methods of Testing Part 5 Mechanical Properties Section 5 Determination of charpy impact properties — Non-instrumented impact test (First Revision) | 10 January 2026 | | 40 | IS 13360 (Part 5/Sec 28/Subsec 2) : 2025 ISO 6603-2 : 2023 Plastics — Methods of Testing Part 5 Mechanical Properties Section 28 Determination of Puncture Impact Behaviour of Rigid Plastics Subsection 2 Instrumented Impact Testing | 10 July 2025 | NA | NA | | 41 | IS 13360 (Part 5/Sec 30) : 2025 ISO 19252 : 2008 Plastics — Methods of Testing Part 5 Mechanical Properties Section 30 Determination of Scratch Properties | 10 July 2025 | NA | NA | | 42 | IS 13360 (Part 6/Sec 1) : 2025 ISO 306 : 2022 Plastics — Methods of Testing Part 6 Thermal Properties Section 1 Determination of Vicat Softening Temperature of Thermoplastic Materials (Third Revision) | 10 July 2025 | IS 13360 (Part 6/Sec 1) : 2018 ISO 306 : 2013 Plastics — Methods of Testing Part 6 Thermal Properties Section 1 Determination of vicat softening temperature of thermoplastic materials (Second Revision) | 10 January 2026 | |---|---|---|---|---| | 43 | IS 13360 (Part 8/Sec 6/Subsec 1) : 2025 ISO 15105-1 : 2007 Plastics — Methods of Testing Part 8 Permanence/Chemical Properties Section 6 Film and Sheeting — Determination of Gas-Transmission Rate Sub-section 1 Differential-Pressure Method (First Revision) | 10 July 2025 | IS 13360 (Part 8/Sec 6) : 1997 ISO 2556 : 1974 Plastics — Methods of Testing Part 8 Permanence/Chemical Properties Section 6 Determination of the Gas Transmission Rate of Films and Thin Sheets Under Atmospheric Pressure — Manometric Method | 10 January 2026 | | 44 | IS 13360 (Part 8/Sec 6/Subsec 2) : 2025 ISO 15105-2 : 2003 Plastics — Methods of Testing Part 8 Permanence/Chemical Properties Section 6 Film and Sheeting — Determination of Gas-Transmission Rate Sub-section 2 Equal-Pressure Method (First Revision) | 10 July 2025 | IS 13360 (Part 8/Sec 6) : 1997 ISO 2556 : 1974 Plastics — Methods of Testing Part 8 Permanence/Chemical Properties Section 6 Determination of the Gas Transmission Rate of Films and Thin Sheets Under Atmospheric Pressure — Manometric Method | 10 January 2026 | | 45 | IS 13360 (Part 8/Sec 15) : 2025 ISO 22088-1 : 2006 Plastics — Methods of Testing Part 8 Permanence/Chemical Properties Section 15 Determination of Resistance to Environmental Stress Cracking (ESC) — General Guidance | 10 July 2025 | NA | NA | | 46 | IS 13360 (Part 8/Sec 16) : 2025 ISO 22088-6 : 2006 Plastics — Methods of Testing Part 8 Permanence/Chemical Properties Section 16 Determination of Resistance to Environmental Stress Cracking (ESC) — Slow Strain Rate Method | 10 July 2025 | NA | NA | | 47 | IS 13360 (Part 8/Sec 17) : 2025 ISO 22088-4 : 2006 Plastics — Methods of Testing Part 8 Permanence/Chemical Properties Section 17 Determination of Resistance to Environmental Stress Cracking (ESC) — Ball or Pin Impression Method | 10 July 2025 | NA | NA | |---|---|---|---|---| | 48 | IS 13360 (Part 8/Sec 18) : 2025 ISO 22088-5 : 2006 Plastics — Methods of Testing Part 8 Permanence/Chemical Properties Section 18 Determination of Resistance to Environmental Stress Cracking (ESC) — Constant Tensile Deformation Method | 10 July 2025 | NA | NA | | 49 | IS 14788 : 2025 ISO 2322 : 2023 Styrene-Butadiene Rubber (SBR) — Emulsion and Solution-Polymerized Types — Evaluation Procedures (Second Revision) | 10 July 2025 | IS 14788 : 2018 ISO 2322 : 2014 Styrene-Butadiene Rubber ( SBR ) — Emulsion and Solution-Polymerized Types — Evaluation Procedures (First Revision) | 10 January 2026 | | 50 | IS 16317 : 2025 ISO 14785 : 2024 Tourism and Related Services — Tourist Information Services — Requirements and Recommendations (First Revision) | 10 July 2025 | IS 16317 : 2015 ISO 14785 : 2014 Tourist Information Offices — Tourist Information and Reception Services — Requirements | 10 January 2026 | | 51 | IS 16705 : 2025 ISO/TS 16095 : 2021 Reclaimed Rubber Derived from Products Containing Mainly Natural Rubber — Evaluation Procedure (First Revision) | 10 July 2025 | IS 16705 : 2018 Reclaimed Rubber Derived from Products Containing Mainly Natural rubber — Evaluation Procedure | 10 January 2026 | | 52 | IS 16713 : 2025 ISO/TS 16096 : 2021 Reclaimed Isobutene-Isoprene Rubber (IIR) — Evaluation Procedure (First Revision) | 10 July 2025 | IS 16713 : 2018 Reclaimed Isobutene-Isoprene (IIR) Rubber — Evaluation Procedure | 10 January 2026 | | 53 | IS 17138 : 2025 ISO 18064 : 2022 Thermoplastic Elastomers — Nomenclature and Abbreviated Terms (First Revision) | 10 July 2025 | IS 17138 : 2019 ISO 18064 : 2014 Thermoplastic Elastomers — Nomenclature and Abbreviated Terms | 10 January 2026 | |---|---|---|---|---| | 54 | IS 17315 (Part 3) : 2025 ISO 4259-3 : 2020 Petroleum and Related Products — Precision of Measurement Methods and Results Part 3 Monitoring and Verification of Published Precision Data in Relation to Methods of Test | 10 July 2025 | NA | NA | | 55 | IS 17315 (Part 4) : 2025 ISO 4259-4 : 2021 Petroleum and Related Products — Precision of Measurement Methods and Results Part 4 Use of Statistical Control Charts to Validate 'in-statistical- control' Status for the Execution of a Standard Test Method in a Single Laboratory | 10 July 2025 | NA | NA | | 56 | IS 17315 (Part 5) : 2025 ISO 4259-5 : 2023 Petroleum and Related Products — Precision of Measurement Methods and Results Part 5 Statistical Assessment of Agreement between Two Different Measurement Methods that Claim to Measure the Same Property | 10 July 2025 | NA | NA | | 57 | IS 17494 : 2025 Cosmetics — Sun Protection Test Methods — In Vivo Determination of Sun Protection Factor (SPF) (ISO 24444 : 2019, MOD) (First Revision) | 10 July 2025 | IS 17494 : 2021 ISO 24444 : 2019 Cosmetics — Sun Protection Test Methods — In vivo Determination of Sun Protection Factor ( SPF ) | 10 January 2026 | | 58 | IS 19048 : 2025 ISO 13802 : 2015 Plastics — Verification of Pendulum Impact-Testing Machines — Charpy, Izod and Tensile Impact-Testing | 10 July 2025 | NA | NA | | 59 | IS 19065 (Part 4) : 2025 ISO 14952-4 : 2003 Space Systems — Surface Cleanliness of Fluid Systems Part 4 Rough-Cleaning Processes | 10 July 2025 | NA | NA | | 60 | IS 19166 : 2025 ISO 10640 : 2011 Plastics — Methodology for Assessing Polymer Photoageing by FTIR and UV/Visible Spectroscopy | 10 July 2025 | NA | NA | |---|---|---|---|---| | 61 | IS 19170 : 2025 ISO 483 : 2005 Plastics — Small Enclosures for Conditioning and Testing Using Aqueous Solutions to Maintain the Humidity at a Constant Value | 10 July 2025 | NA | NA | | 62 | IS 19199 : 2025 Sugar Cane Juice Screens — Specification | 10 July 2025 | NA | NA | | 63 | IS 19211 : 2025 ISO 14953 : 2024 Space Systems — Structural Design — Determination of Loading Levels for Static Qualification Testing of Launch Vehicles | 10 July 2025 | NA | NA | | 64 | IS 19232 : 2025 Methods for Testing Tar and Bituminous Materials — Determination of Specific Gravity of Bituminous Mixtures | 10 July 2025 | NA | NA | | 65 | IS 19270 : 2025 ISO 11930 : 2019 Cosmetics — Microbiology — Evaluation of the Antimicrobial Protection of a Cosmetic Product | 10 July 2025 | NA | NA | | 66 | IS 19275 : 2025 Automotive Fuels — Paraffinic Diesel Fuel from Synthesis or Hydrotreatment — Specification (EN 15940 : 2023, MOD) | 10 July 2025 | NA | NA | | 67 | IS 19303: 2025 ISO 11684 : 2023 Tractors, Machinery for Agriculture and Forestry, Powered Lawn and Garden Equipment — Safety Labels — General Principles | 10 July 2025 | NA | NA | RACHNA SEHGAL, Scientist G & DDG (MSC) [ADVT.-III/4/Exty./247/2025-26] and Published by the Controller of Publications, Delhi-110054. GORAKHA NATH NATH YADAVA Date: 2025.07.18 14:58:24 +05'30' YADAVA