Whereas the draft regulation namely, the Bureau of Energy Efficiency Particulars and Manner of their Display on Labels of Washing Machine

EXTRAORDINARY PART III—Section 4 PUBLISHED BY AUTHORITY No. 739] NEW DELHI, TUESDAY , OCTOBER 31 , 2023/ KARTIKA 9, 1945 CG-DL-E-04112023-249845 जपछले िषा.... ....................... से................................तक चालू िषा ......................... से.......................................तक तारीख ............ ददन.................... (िषा) हस्ट्ताक्षर ................................ नाम................... .................... पदनाम................................... हस्ट्ताक्षर ................................ नाम................................. .... पदनाम................................... ____________________ तक _____________________ तक हस्ट्ताक्षर . ............................... नाम ...................................... पदनाम..... ............................... तारीख हस्ट्ताक्षर ………………………… नाम …………………………….. पदनाम ………...……… ….……. .................. ...................................................... .......... ............................................ ...................................................... ............................. ............................. ............................. तारीख ............... ...... हस्ट्ताक्षर ............................................. नाम .................................................... पदनाम ............... ................................ (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) तारीख: ... ............. तारीख ................ (िषा) का ददन ..... ............................... हस्ट्ताक्षर ............ ............................. नाम......................... ................. ..... पदनाम................... ........................ ……………… ..... ………………….. सेिा में नई ददल्ली , तारीख …..... …………… ….. ……………….. ………………. सेिा में तारीख ....................... नाम……………………… पद …………….........….. THE BUREAU OF ENERGY EFFICIENCY NOTIFICATION New Delhi, the 31st October, 2023 F.No. BEE/S&L/WM/06/22 -23.—Whereas the draft regulation namely, the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Washing Machine) Regulations, 2023, were published vide notification number BEE/S&L/WM/06/22 -23, on dated 23rd January, Extraordina ry, Gazette of India, part III , Section 4 as required under sub -section (1) of section 58 of the Energy Conservation Act, 2001 (52 of 2001 ), inviting objection & suggestion & from persons likely to be affected thereby within the specified period of thi rty days from the date of publication of the said notification in the Official Gazette; And whereas, Gazette copies of the said draft regulation were made available to the public on 23rd January, 2023; And whereas, objections and suggestions have been rec eived with respect to the said draft regulation within the period aforesaid; And whereas, the suggestions received in this regard have been taken into consideration; Now, therefore, in exercise of the powers conferred by clause (i) of sub -section (2) of section 58 read with clause (n) of sub -section (2) of section 13 and clause (d) of section 14 of the Energy Conservation Act, 2001 (52 of 2001), the Bureau, with the previous approval of the Central Government, hereby makes the following regulations, namel y:- 1. Short title and commencement. - (1) These regulations may be called the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Washing Machine), Regulations, 2023. (2) They shall come into force on the date of their publicat ion in the Official Gazette. 2. Definition . - (1) In these regulations, unless the context otherwise requires, -- (a) “Act” means the Energy Conservation Act, 2001(52 of 2001); (b) “Form” means a form appended to these regulations; (c) “label” means any written, prin ted, marked, stamped or graphic matter affixed to, or appearing upon the Washing Machine; (d) “label period” means the validity period of per -cycle energy consumption per kg under energy performance standards notified by the Central Government under clause (a) of section 14 of the Act: Provided that if, by the ending timeline of the label validity period, the new energy performance standards under clause (a) of section 14 of the Act are not notified, the existing standards shall deemed to be valid until new values for the Same are notified by the Central Government; (e) “permitee” means a person or agency to whom permission has been granted to affix label under regulation 7; (f) “Schedule” means the Schedule annexed to these regulations; (g) “Star rating or star level” means the grade of energy efficiency displayed on the label of the washing machine based on energy consumption per cycle notified by the Central Government under clause (a) of section 14 of the Act. and the available stars are betwe en a minimum of one and a maximum of five shown in one star interval. (h) “trader or seller” in relation to any washing machine means a person who sells or distributes such washing machine and includes shopkeeper, trader, manufacturer and permittee who has been given permission to affix label on such washing machine; (i) “Washing Machine” means an appliance as specified in the notification under clause (b) of section 14 of the Act; (2) Words and expressions used herein but defined in the Act, shall have meanings assigned to them in the Act. 3. Particulars to be displayed on label . - (1) On every washing machine, the following particulars shall be displayed on its label, namely: - (a) Star level; (b) logo of the Bureau of Energy Efficiency; (c) name of appliance; (d) type of washing machine; (e) Brand or make; (f) Model number and year of manufactu ring or import; (g) load capacity; (h) water consumption; (i) unique label series code; and (j) label period. (2) The design, colour, size and content of label shall be as specified in the Schedule annexed to these regulations. 4. Time limit for display of labels. — (1) Transition from Voluntary to Mandatory regime. - A label containing all the particulars specified in regulation 3 shall be displayed on every washing machine within a period of six months from the date of coming into force of these regulations. (2) Revision of Mandatory Energy performance standards. - On and from commencement of revised energy performance standards notified by the Central Government under clause (a) of section 14 of the Act, every permittee or trader or seller, - (a) shall not produce t he washing machine with the previous energy performance standards; (b) the washing machine shall display revised star level and label period with the revised energy consumption standard and the manufacturing year of the washing machine in synchronization w ith revised energy performance standards: and provided that for smooth transition, manufacturer shall produce or import the product two months in advance from the date of such commencement with the revised energy performance standards. (c) all preparatory steps including awareness of the dealers, retailers, requisite publicity for their education as well as for the education of the consumers are well planned and action taken three months in advance. 5. Manner of display of label. - (1) There shall be label on every washing machine which shall displayed at the point of sale and such label shall be affixed on washing machine in the following manner, namely: - (a) The label shall be firmly affixed at the front side of each appliance and should be easily visible as referred in sub -regulation (2) of regulation 3 and the permittee shall ensure that the label appears on every registered unit or model at point of sale and the label shall also be printed or pasted on the packaging box of the unit or model; and (b) The la bel shall be of self – adhesive material. The markings required by the schedule shall be legible, indelible and durable. (2) For units not on display, the label may be printed or pasted to the exterior to the casing and this label may be attached to the unit or model when the unit or model is removed from its packaging or the label shall be included as a part of the documentation given to the customer or user. 6. Permission for display of label .- (1) No star label shall be affixed on a washing machine withou t obtaining the prior permission of the Bureau. (2) Company registration. - For the purposes of obtaining permission of the Bureau under sub -regulation (1), an application for registration shall be made for every brand separately as specified in Form I (A), and accompanied by a label security deposit of one lakh rupee payable by acceptable electronic mode of payment: Provided that in case of small scale industry, the label security fee shall be twenty five thousand rupees only. (3) Model registratio n.- Every application of the permittee under sub -regulation (2) shall be accompanied by— (a) an application fee of two thousand rupees per model, payable by electronic mode of payment; and (b) a label security fee of one lakh rupees, payable b y electronic mode of payment: Provided that in case of small scale industry label security fee shall be only twenty -five thousand thousand rupees; and (c) documents specified in Form I (B). 7. Grant of permission. - (1) On receipt of an application under regulation 6 and after being satisfied that all requirements therein are complied with, the Bureau may, within a period as specified in DISHA (Bureau’s Operation Manual on Standards and Labelling) subject to such terms and conditions as specified in regulation 8, – (a) register the brand in Form II -(A) in electronic form; and (b) grant permission for affixing label on washing machine in Form II (B) in electronic form. (2) The Bureau shall maintain a register in Form III and enter the name of the permittee therein. (3) The permission so granted under sub -regulation (1) shall be valid for such period till the star level specified by the energy consumption standard as notified by the Central Government under clause (a) of section 14 o f the Act. (4) In case of revision of star rating plan, an application for renewal of permission shall be made by the permittee not later than one month before its expiry and shall be accompanied by a fee of rupees one thousand payable in electronic mode i n favour of the Bureau of Energy Efficiency, New Delhi: Provided that in case of extension of star rating plan, the said renewal fee of rupees one thousand shall be exempted. (5) No application shall be renewed after expiry of validity period, in which case the permittee shall make a fresh application. (6) On receipt of application for renewal under sub -regulation (4) and after being satisfied that all requirements are complied with, the Bureau may, within a period of one month from the date of such rece ipt, renew permission in Form II B. (7) The permittee who seeks permission for continuance to affix label on the existing model of the washing machine from the date from which the revised star level comes into force, shall submit only a declaration in Form IV. (8) The permittee shall seek permission to affix label afresh, if new model of the washing machine is planned to be launched to synchronise with the revised star level and application for such permission may be made six months in advance of coming into force of the revised star level. 8. Terms and conditions for display of particulars on label . - Every permittee, trader and seller shall, - (a) comply with the energy performance standards for washing machine notified by the Central Government under clause (a) of section 14 of the Act; (b) affix label only on such model of washing machine for which permission has been granted; (c) print and affix label on washing machine at the cost of permittee; (d) ensure that the star level displayed on the label of washing machine shall be maintained at all time; (e) pay the label fee as specified in regulation 9; (f) furnish to the Bureau a statement containing details of production of labelled equipment and the accrued labelling fee due for each quarter within the following month of the close of each quarter of the financial year; (g) furnish to the Bureau an updated list of authorised distributors, dealers, retailers, sellers appointed to sell their labelled products by 30th day of April of each year ; and (h) comply with such other terms and conditions which the Bureau may specify including those contained in the Bureau’s Manual on Standard and Labelling. 9. Label fee. - (1) Every permittee shall pay to the Bureau a label fee of rupees thirty for eac h label affixed on the washing machine. (2) The label fee specified under sub -regulation (1) shall be paid annually within one month from the date of closure of each financial year: Provided that on failure to pay the label fee within the period so spec ified, the Bureau shall recover the amount due with interest thereon at ten percent per annum from the label security deposit paid made under clause (b) of sub -regulation (3) of regulation 6, and if complete labelling fees are not recovered within one yea r of the last date of submission, the Bureau may cancel the permission to labels granted to the permittee and publish the name of the permittee in the national or regional daily newspapers and in electronic means as a defaulter. 10. Refund of label securit y fee . -- Subject to the provisions of sub -regulation (2) of regulation 9, a permittee shall be entitled to a refund of the label security deposit, on ceasing to manufacture washing machine. 11. Verification by Bureau. - (1) The Bureau or its designated ag ency may, either suo motu, or on a complaint received by it and carry out verification to ensure that the washing machine conforms to the star level and other particulars displayed on its label and it complies with the other terms and conditions of permis sion. (2) All test includes wash performance, rinse performance, energy consumption, water consumption and water extraction performance (residual water content). (3) For the purpose of verification, samples shall be picked up at random by Bureau or its designated agency from the manufacturing facility and warehouse or the retail outlet as it deems fit. (4) Where, upon a complaint received under sub -regulation (1), the Bureau is required to carry out verification by challenge testing the washing machine in an independent laboratory duly accredited by National Accreditation Board for Testing and Calibration Laboratories, - (a) the Bureau shall issue a notice to the permittee in form V for carrying out such testing and the complainant shall be called upon to deposit, such expenses relating to sample cost, testing, transportation and other incidental expenses with the Bureau, within such time, as may be determined by Bureau. (b) if the sample drawn under challenge testing fails, all expenses towards the co st of sample, transportation of sample and the testing charges, shall be reimbursed by the permittee to the Bureau and the Bureau shall refund the aforesaid expenses to the complainant; and (c) where the equipment passes the challenge test, then, the expen ses deposited by the complainant shall be forfeited. (5) Where, upon a complaint received under sub -regulation (1), if the permittee fails to deposit such expense referred to in sub -regulation (3) within such time, the Bureau shall - (a) continue the verif ication by challenge testing the washing machine referred to in sub -regulation (3); and (b) the processing of application received under regulation 6 may be kept in abeyance till such expense are deposited. (6) Where samples of washing machine used for testing fails the test during suo motu testing or challenge testing, the Bureau shall offer the permittee, another opportunity and conduct a second test with twice the quantity of washing machine used in the first test, in an independent test laboratory wh ich is different from the lab where the first check testing was conducted and shall be duly accredited by National Accreditation Board for Testing and Calibration Laboratories at the cost of the permittee and the Bureau shall intimate the permittee in Form V to witness the challenge testing referred to in sub -regulation (3) or the second test referred to in sub -regulation (4) and the expenses to be made towards the procurement and testing of sample.. (7) Where the second test fails, the Bureau shall, - (a) direct the permittee in Form VI, under intimation to all the State Designated Agencies, that the permittee within a period of two months shall, - (i) correct the star level displayed on the label of the washing machine or remove the defects and deficien cies found during testing; (ii) withdraw all the stocks from the market to comply with the directions of the Bureau; and (iii) change the particulars displayed on advertising material; (b) publish for the benefit of the consumers, the name of a ny permittee, brand name, model name or model number, logo and other specifications in any national or regional daily newspaper and in any electronic means or in any other manner as it deems fit, within two months; (c) Intimate to the concerned State Desi gnated Agency to initiate adjudication proceedings against the permittee and the trader under section 27 of the Act. (8) The permittee shall within ten days of the conclusion of the period of two month s referred to in sub-regulation (7),- (a) send the compliance report in Form VII to Bureau with respect to action taken in compliance with the direction; and (b) in case the compliance report referred to in clause (a) is not received or received without complying to any of the direction within the spec ified period, it shall be deemed as non -compliance of the direction issued and orders to that effect shall be passed by the Bureau. (9) The Bureau shall send a copy of the compliance report referred to in clause (a) and orders passed in clause (b) of sub -regulation (8) along with necessary documents to all the State Designated Agencies for the purpose of taking action under section 17 of the Act and enforcement of the orders passed under clause (b) of the said sub-regulation. (10) Where the permittee fai ls to comply with the directions issued by the Bureau under sub -regulation (7), the Bureau under intimation to all State Designated Agencies, shall, - (a) withdraw the permission granted to the permittee under sub -regulation (1) of regulation 7; (b) send report to the Central Government accompanied by the test report in support of the failure by the permittee to conform to the energy performance standards notified by the Central Government under clause (a) of section 14 of the Act and the directio ns of the Bureau referred to in clause (a) of sub -regulation (8) for consideration and taking action under clause (c) of section 14 of the Act by the Central Government; (c) publish for the benefit of the consumers, the name of any permittee, brand name, m odel name or model number, logo and other specification in any national or regional daily newspaper and in any electronic or in any other manner as it deems fit within two months; and (d) intimate to the concerned State Designated Agencies to initiate fu rther adjudication proceedings against the permittee and the trader under section 27 of the Act. 12. Cancellation of permission. -The Bureau shall cancel the permission granted under regulation 7, if the permittee – (a) fails to comply with any of the terms and conditions specified under regulation 8; (b) fails to pay label fee within the period specified under regulation 9; (c) does not comply with the direction issued under regulation 11. Provided that no permission shall be cancelled unless the per mittee has been given an opportunity being heard in the matter ABHAY BAKRE, Director General, [ADVT. -III/4/Exty./ 521/2023 -24] FORM I – (A) [See sub – regulation( 2) of regulation 6] (To be printed in Company letter head) Application for registration of brand of washing machine under the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of washing machine) Regulations, 2023 The Director General Bureau of Energy Efficiency, (Ministry of Power, Government of India) 4th Floor, Sew a Bhawan, Sector -I, R.K. Puram, New Delhi – 110 066 India. I/We am/are the manufacturer/manufacturers of washing machine carrying out business at....................................................... (full business address) under the style of (full name o f individual or firm) hereby apply for permission to affix label on washing machine as specified by the Bureau in the Bureau of Energy Efficiency (Particulars and Manner of their Display of the Label on Washing Machine) Regulations, 2023. The details of th e information in respect of the equipment, company, manufacturing facility and payment is given in Annexure A -I. A photocopy of the certificate of incorporation issued by the Registrar of Firms or Societies or Director of Industries (in case of Small Scale Units) or similar other documents authenticating the name of the firm and its manufacturing premises is enclosed. (a) Applicant/Authorised person: .......................................................... (Name and Designation) is authori sed to make this application on behalf of the company/firm etc. and will be responsible for accuracy of the information supplied with this application. (b) Contact person:…………………..(Name and designation) is authorised contact person for coordination with the Bureau in resp ect of this application and use of the label. (c) I/We undertake to intimate to the Bureau of any change in the authorized persons defined in (a) or (b) above. 3. Production and sale figures of the said equipment and the value there of to the best of my/ou r knowledge and estimates are as follows: Year Production Sales Maximum retail price of the equipment (Rs.) Last year from..................................... to.......................................................... Current year from................ ................ to…………… (estimate) 4. A label security fee of one lakh rupees or twenty -five thousand rupees (as the case may be)…………….has been paid by electronic mode……..dated………. (To be filled only at the time of submission of label security fee). 5. I/We agree to pay the labelling fee as specified by the Bureau. 6. I/We agree to abide by all the terms and conditions specified by the Bureau and extend necessary assistance/co - operation to the Bureau in case of any enquiry to be made by it. 7. I/We a uthorise the Bureau of Energy Efficiency for selection of sample for verification and challenge testing and agree to abide by the directions of the Bureau in this regard. 8. I/We undertake that the information supplied in this application is accurate to th e best of my knowledge, and if any of the information supplied is found to be incorrect; the application may be rejected forthwith. Dated this ............Day of …………(Year) Signature……............................................... Name ....... ..................................................... Designation ................... ......... ...................... For and on behalf of........... ........... ................ (Name of the firm) SEAL OF FIRM Annexure A -I [See para 2 of Form I – (A)] 1. Details of the Company Name of t he company Address Pin code State Phone number Fax number E-mail Website Enclosures to support registration: Yes/No (a) Document authenticating the name and address of the manufacturing or business premises (b) Trade mark certificate (c) Small scale industries Certificate, if applicable (d) Quality Management System Certificate (e) Authorised signatory letter (f) Bureau of Indian standards license, if applicable (g) payment rece ipt for payment is made online 2. Details of the manufacturing premise (a separate table may be provided in case of more than one manufacturing facility) Name of the manufacturing facility Address Pin code State / Country Phone number Fax number E-mail Website Any other details (if any) Signature................... ..................... Name ............... ............................... Designation .................................... For and on behalf of...................... (Name of the firm) Seal of the Firm FORM I - (B) [See sub regulation (3) of regulation 6] Application for permission to affix labe l on Washing Machine under the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine ) Regulations, 2023. The Director General Bureau of Energy Efficiency (Ministry of Power, Government of India) 4th Floor, Sewa Bh awan, Sector – 1, R.K.Puram New Delhi -110066 India. 1. I/We are registered manufacturer of Washing Machine under the brand name………………(Name of the brand) and the unique label series code issued by Bureau of Energy Efficiency is ……….. 2. Manufacturing Facil ity: The above equipment is manufactured or imported by ___________ (Name of the company) and is manufactured at ____________ (Name and address of the factory) 3. Details of information: The details of the information in respect of the equipment, company, manufacturing facility, certification for the test products, labels and payment is given in Annexure. A photocopy of the certificate of incorporation issued by the Registrar of Firms or Societies/Director of Industries (in case of Small Scale Units) or similar other documents authenticating the name of the firm and its manufacturing premises is enclosed. (a) Applicant/authorized person: ______________________ (Name and Designation) is authorised to make this application on behalf of the company/firm/etc., and will be responsible for accuracy and authenticity of the information supplied with this application. (b) Contact Person: ______________________ (Name and Designation) is the authorized contact person for coordination with the Bureau in respect of this application and the use of the Label. (c) I/We undertake to intimate to the Bureau of any change in the authorised persons defined in (a) or (b) above 4. Conformance to Standards: I/We conform to the Bureau of Indian Standard/other international standar ds in respect of Quality System/Other standards in accordance with IS/Others (name and number of the standard) ___________ as specified in the notification on ___________________(title of the notification) for the ________ (name of the equipment). A cop y of the License / certificate in respect of the above equipment is enclosed. I/We have made arrangement for testing at our in -house laboratory (name and address where lab is located)________________ or at independent laboratory ________ (Name and address of the laboratory) which is accredited by National Accreditation Board for Testing and Calibration Laboratories or any other International Laboratory Accreditation Cooperation for ensuring consistency in quality of the equipment as well as the scope of th e relevant Indian Standard/ International Standard Organization /International Electrotechnical Commission standards as specified in S.O…... Laboratory details: a) Accreditation Board: b) Accreditation status: (i) For Laboratory: (Yes/No) (ii) For Test Standard s: (Specify relevant product standard name / number) (iii) For relevant test method (specify name of the test) 5. Production and sales figures of the said equipment and the value thereof to the best of my/our knowledge and estimates are as follows Year Production Sales MRP of the equipment (Rs.) Last year from ___________ to ____________________ Current year from ________ to_____________________ (estimate) 6. (a) An application fee of two thousand rupees….has been paid via electronic mode…… dated ………… (b) A Label security fee of one lakh rupees or twenty five thousand rupees _ ____________________________ has been paid by electronic mode. (c) I/We agree to pay the labeling fee as specified by the Bureau. 7. I/We agree to abide by all the terms and conditions specified by the Bureau and extend necessary assistance/co - operation to the bureau in case of any enquiry to be made by it. 8. I/We authorise the Bureau of Energy Efficiency for selection of sample for verification and challenge testing and agree to abide by the directions of the Bureau in this regard. 9. I/We undertake that the information provided in this application is accurate to the best of my knowledge, and if any of the information supplied is found to be incorrect; the application may be rejected forthwith. Dated this …………day of ……. (Year) Yours Faithfully, Signature …..……………………… Name ……………………………… Designation ……………………….. For and on behalf of….…………… (Name of the firm) SEAL OF FIRM Annexure A -II [See para 3 of Form I (B)] Details of Info rmation 1. Product/Equipment Detail 1.1 General Manufacturer/Laboratory Name Address Date of Receipt (for Independent Labs) Test standard followed Test Report No. Date of testing Tested by Reviewed By 1.2 Technical details Brand Name Model No. Model Name Year of Manufacturer Washing machine type Semi Auto/Top load/Front load In-built heater present? (Yes/no) Serial No. Wash/rinse programme followed Capacity (kg) Wash performance (%) Rinse performance Water consumption per cycle (L/kg) Remaining moisture content (RMC) (%) Energy consumption per cycle (kWh/kg/cycle) Cotton 30 o C /Cotton 60 o C Star Rating 2. Details of the company Name of the company: Address Pin Code State Phone No. Fax No. E-Mail Web site Name of the Authorized representative 3. Details of the manufacturing premise Address Pin Code State Phone No. Fax No. E-Mail Web site Any other details Name of the Authorized representative 4. Details of test la boratory Name of the test Laboratory Accreditation status (Attach copy of the accreditation certificate) Validity of the accreditation (Attach supporting document) Scope of Accreditation Address Pin Code State Phone No. Fax No. E-Mail Web site 5. Labeling information Date of commencement Number of labels applied for Bureau of Energy Efficiency for the first year - for the second year - for the third year - Product Serial No. From ____________ To ____________ 6. Payment details Total Amount Details of Payment (electronic payment details) Application Fee Security Deposit 7. Specimen of the label to be affixed on the washing machine is shown below: Date Signature ………………………… Name …………………………….. Designation ………...……………. For and on behalf of……..………. (Name of the firm) / SEAL OF FIRM FORM II – (A) [See regulation 7 (1) (a)] Permission for registration of brand of washing machine under the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine) Regulations, 2023 New Delhi dated.................. To ...................................................... ...................................................... ...................................................... 1. Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Washing Machine) Regulations, 2023, the Bureau hereby permits you to register your brand as per details of approvals set out in Annexure A -III to this letter. 2. This permission is subject to— (a) the star level displayed on th e label of the washing machine shall conform to energy performance standards for washing machine notified under clause (a) of section 14 of the Act and terms and conditions provided in the aforesaid regulations; (b) the stamping of the label only on such model of washing machine for which permission has been granted; (c) the label shall be affixed on the product washing machine and printed or affixed on the product packaging at the cost of the permittee; (d) the permittee shall ensure that the star level displayed on t he washing machine shall be maintained at all time; (e) the permittee shall pay the label fee as specified by the Bureau; (f) the permittee shall furnish to the Bureau a statement containing details of the production of the labelled equipment and the accrued label ling fee due for each quarter within the following month of the close of each quarter of the financial year and the same details shall be furnished to the Bureau also through an automated system; (g) the permittee shall make available such other details of was hing machine as and when sought by the Bureau of which the permission has been granted. 3. The permittee shall not withdraw the registered brand and the washing machine from the market during the validity period except with the prior approval of the Bureau. 4. The unique label series code assigned by the Bureau of Energy Efficiency for the brand is............. and should appear on the label as per the approved design. 5. Signed, sealed and dated this................. day of .............month….year. Yours faithful ly, (Secretary) Bureau of Energy Efficiency Annexure A -III [See para 1 of Form II -(A)] Details of Approvals 1. Details of the company Name of the company Address Pin code State Phone number Fax number E-mail Website 2. Name of the brand registe red: 3. Unique series code: 4. Other details if applicable: Date: Yours faithfully, (Secretary) Bureau of Energy Efficiency FOR M II (B) [Sub -regulation 7(1)(b)] Permission / renewal of permission to affix label on Washing Machine under the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine ) Regulations, 2023 New Delhi, dated the....... .. To ...................................................... ....................................................... 1. Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency ( Particulars and Manner of their display on Labels of Was hing Machine ) Regulations, 2023, the Bureau hereby permits you to stamp and print or affix label as per details of approvals set out in the Annexure A -IV to this letter. 2. This permission is subject to — (a) the star level displayed on the label of the washing machine shall conform to energy performance standards for washing machine notified under clause (a) section 14 of the Act and terms and conditions provided in the aforesaid regulations; (b) the label shall be affixed only on such model of washing mac hine for which permission has been granted; (c) the label shall be printed and affixed on the washing machine at the cost of the permittee; (d) the permittee shall ensure that the star level displayed on the washing machine shall be maintained at all time; (e) the permittee shall pay the label fee of thirty rupees per label; (f) the permittee shall furnish to the Bureau a statement containing details of production of labelled equipment and the accrued labelling fee due for each quarter within the following month of the close of each quarter of the financial year. The same details shall be furnished to the Bureau also through automated systems; (g) the permittee shall make available such other details of washing machine as and when sought by the Bureau for which the permission has been granted. 3. This permission shall be valid for from ............................... to .............................and may be renewed as prescribed. The permittee shall not withdraw the washing machine from the market durin g the validity period of permission except with the prior approval of the Bureau. 4. The unique label series code assigned by Bureau of Energy Efficiency for the equipment is.............and should appear on the label as per the approved design. 5. Where the star level plans on review is modified by the Central Government, the star level of the washing machine shall stand modified as follows: - (a) if new model is launched synchronizing with the revised star level, an application for such permission shall be made to Bureau six months in advance of the date from which new star level comes in to force; (b) where the existing model is continued to give effect to the modified star level, only a declaration in Form IV shall be submitted to the Bureau. 6. Signed , sealed and dated this................. day of ……….month.............. year. (Secretary) Bureau of Energy Efficiency Annexure [See para 1 of Form II] Details of Approvals 1. Details of the Equipment Equipment / Appliance Type (Semi -automatic, top load , front load) Model Name / Year of Manufacturing Name of the manufacturer/Importer Rated Capacity Water Performance (Soil Removal %) Water Extraction Performance Rinse Performance Program In Built Heater Energy Consumption per kg/cycle/program Water Consumption per kg/cycle/program SL. No. Model Name/ No. Measured values Rated values Capacity (kg) Energy Consumption per kg per cycle Capacity (kg) Energy Consumption per kg per cycle 2. Label Details Equipment Type Name of t he make/manufacturer/importer Model Name/Year of Manufacturing Star level Rated Capacity Water Consumption per cycle/program Label period Energy Consumption (per kg per cycle) Country of Origin Unique Series Code 3. Specim en of the label duly approved by Bureau to be affixed on the washing machine is shown below. The unique label series code provided in the letter has to be mentioned in the label affixed on the Washing Machine. 4. The label design, size, colour scheme, material to be used for the label and the content of the label and colour scheme of the Bureau's logo shall be as specified in the Schedule. Date ..................... Signature ............................................. Name.......... .......................................... Designation ......................................... For and on behalf of............................ (Name of the firm) SEAL OF FIRM FORM III [See sub -regulation (2) of regulation 7] Register of Permittees to b e maintained by Bureau of Energy Efficiency (template) Sl. No. Application No. and Date of Permission Name and details of the permittee (Contact Person, Address, Pin Code, State, Phone No., Fax No., E - mail, Website) Details of equipment for which the permi ssion has been granted Star level or Efficiency level declared Bureau of Energy Efficiency permission number and unique label series Period for which the permission has been granted (1) (2) (3) (4) (5) (6) (7) Amount of Label Security Fee Label Security Fee received by (Electronic transaction (Details): Date:) Details of Application Fee Amount received (Electronic transaction (Details):Date:) (8) (9) (10) Total number of labels affixed during each financial year Amount of labeling fee payable to Bureau of Energy Efficiency for each financial year Labeling fee details received for each financial year (Electronic transaction Details): Date:) Remarks (11) (12) (13) (14) Form IV [See sub -regulation (7) of regulation 7] Declaration by Permittee seeking continuation of the permission to affix label on the existing model (For each different model, a separate letter shal l be submitted along with respective Annexure) (On the letter head of Corporate body/Permittee) Date: To THE DIRECTO R GENERAL BUREAU OF ENERGY EFFICIENCY (MINISTRY OF POWER, GOVERNMENT OF INDIA) 4TH FLOOR, SEWA BHAWAN, SECTOR 1, R.K.PURAM, NEW DELHI -110066 INDIA. Sub: Application for permission to affix label vide Bureau of Energy Efficiency ( Particulars and Man ner of their Display on Label of Washing Machine ) Regulations, 2022 on revision of star level effective from ………. 1. I/ We are the manufacturers / importers of washing machine carrying on business at [COMPANY NAME WITH FULL ADDRESS] under the style of [FUL L NAME OF INDIVIDUAL OR FIRM] hereby apply for permission to affix label on washing machine as specified by the Bureau in the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine ) Regulations, 2023 which would go for revision of star level with effect from ............. 2. The above equipment is manufactured or imported by [FULL NAME OF INDIVIDUAL OR FIRM] and is manufactured at (NAME AND ADDRESS OF FACTORY) or imported from (NAME AND ADDRESS OF IMPORTER) 3. Conf ormance to New Star level: I/We conform to the table change as per Table … as specified in the notification number S.O. number. ..……….dated...... for washing machine. A copy of the Bureau’s approval in respect of the above equipment (which was earlier ap proved) is enclosed. 4. A copy of the Bureau of Energy Efficiency Label (as per revision of star level change) in respect of the washing machine is enclosed. 5. Details of the Equipment or Model as per revision of star level Model Name - _______________ _____________ Particulars Declared Values Rated Capacity Water Consumption per cycle/program Energy Consumption per cycle -- Star Rating (As per existing star level) (As per the revised star level) 6. I/We agree to change the star level from [EXISTING STAR LABEL LEVEL] to [REVISED STAR LABEL LEVEL] in manual application as well as in the online web portal. 7. I have submitted my quarterly production data and labelling fee till date for the said washing machine mo del. 8. I/We agree to abide by all the terms and conditions specified by the Bureau and extend necessary assistance/cooperation to the Bureau in case of any enquiry to be made by it. 9. I/we authorise the Bureau of Energy Efficiency for selection of sampl e for verification and challenge testing and agree to abide by the directions of the Bureau in this regard. 10. I/We undertake that the information supplied in this application is accurate to the best of my/our knowledge, and should any of the information supplied is found to be incorrect, the application may be rejected forthwith. Date: Day of ……………….. (Year) Signature …….……………… Name …….………………….. Designation …………………. For and on behalf of…………. (Name of the firm) SEAL OF FIRM FORM V [See sub -regulation (6) of regulation 11] Intimation to permittee to witness Challenge test/Second test To New Delhi, dated the….. ......................... ......................... Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency (Particulars an d Manner of their Display on Label of Washing Machine) Regulations, 2023 you were permitted to affix label on the washing machine vide Bureau of Energy Efficiency letter No. ..............dated subject to the compliance of the terms and conditions specifie d therein. 2. The Bureau, under regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine) Regulations 2023, had purchased a Bureau of Energy Efficiency star labelled washing machine from your author ised distributor or dealer or retailer vide Invoice number .......dated…….. for a price of Rs................ and lifted as a sample dated by ___ for the purpose of suo motu testing or challenge testing. The samples were purchased by M/s , an agency appointed by the Bureau for verification of the particulars displayed on the label under regulation 3 of the aforesaid regulations, affixed by you on the aforesaid purchased washing machine. The sample duly sealed by M/s............... bearing serial numbe r-------- was obtained from M/s..........(Name of the Distributor, dealer, retailer) under signatures of the duly authorized representative of the verification agency. 3. The Bureau through its aforesaid verification agency had transported the sample referred to in para 2 to M/s. ----, a National Accreditation Board for Testing and Calibration Laboratories accredited laboratory for conducting tests in accordance with the test procedure indicated in paragraphs 3, 4 and 5 of the notification number S.O....dated.. .... for giving test report in accordance with the Form given in Annexure to the notification number S.O. ....... 4. The details of the product and the suo motu test results (if applicable) is enclosed with this letter. Now, therefore in pursuance of the p rovisions of sub -regulation (1) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine) Regulations 2023, the Bureau is conducting suo motu test/challenge test (as applicable) on ……..(date) at …………(Name of laboratory), accredited by National Accreditation Board for Testing and Calibration Laboratories. 5. Pursuant to the provisions of sub -regulation (6) of regulation 11of the Bureau of Energy Efficiency (Particulars and Manner of their Displa y on Label of Washing Machine Regulations 2023, the Bureau hereby intimates to - (i) nominate an official to witness challenge test or second test on the above date specified along with an authorization letter indicating (in original) the name, designation and signature of the nominated official (the letter shall be duly signed and stamped by authorised signatory of the company). (ii) deposit such cost towards procurement, transportation, testing and other incidental expenses as mentioned in Annexure, within fifteen days from the date of issuance of this letter (the expenses shall be deposited through electronic mode). 6. You may note that the Bureau shall continue the verification by challenge test or second test, even if the aforementioned expenses are not made in time or the officials are not nominated as specified and shall take further follow up action in the matter in terms of sub -regulation (7) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machi ne) Regulations 2023. 7. Signed, sealed and dated this................. day of ……….month .................. year. (Secretary ) Bureau of Energy Efficiency Enclosures: 1.Details of product/ suo motu test results 2.Annexure V(a) 3.Invoice related to the expenses Annexure [See para 5 of Form V] Details of Information 1. Product or equipment details picked up for challenge test/second test Brand name: Unique label series code: Model name/Model number: Type of washing machine: Wash Performance (Soil removal %): Wash Extraction Performance: : Rinse Performance: Program: In built Heater : Energy Consumption : Water Consumption: Year of Manufacturing: Star rating or star level: 2. Amount to be deposited to the Bureau: Details Numbers/ expenses (in Indian Rupee) Number of samples Cost per sample Total purchasing cost Total testing charges Transportation charges (if applicable) Others (if applicable) Total amount to be paid by the permittee 3. Results of suo moto test (if applicable): Date ………. (Secretary) Bureau of Energy Efficiency FORM V I [See sub -regulation (7 ) of regulation 11] Direction to Permittee o n failure of second check testing To New Delhi, dated the….. ......................... ......................... ......................... Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency ( Particulars and Manner of their Display on Label of Washing Machine ) Regulations, 2023 , you were permitted to affix label on the washing machine vide Bureau of Energy Efficiency letter No. ..............dated....... subject to the compliance of the terms and conditions specified therein. 2. The Bureau, under Regulation … of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine ) Regulations, 2023 , had purchased a Bureau of Energy Efficiency star labelled washing machine from your aut horised Distributor, dealer, retailer vide Invoice number .......dated for a price of Rs................ and lifted as a sample dated ……by M/s......................, an agency appointed by the Bureau for verification of the particulars displayed on the la bel under regulation 3 of the aforesaid regulations, affixed by you on the aforesaid purchased washing machine. The sample duly sealed by M/s............... bearing serial number……..was obtained from M/s..........(Name of the Distributor, dealer, retailer) under signatures of the duly authorised representative of the verification Agency. 3. The Bureau through its aforesaid Verification Agency had transported the sample referred to in para 2 to M/s. ..................., a National Accreditation Board for Testing and Calibration Laboratories accredited laboratory for conducting tests in accordance with the test procedure indicated in paragraphs 4 and 5 of S.O.number ……dated the …. for giving Test Report in accordance with the Form ….given in Annexure to S. O.. number…….. dated the …….. 4. The results of the Test Report on the sample bearing Unique Identification serial number is enclosed. The results of the Test Report indicated that the sampled washing machine failed to meet the energy consumption test. a nd did not conform to the Test details furnished by you in Form 1 annexed to the Application submitted by you for seeking permission to affix label on the washing machine manufactured or imported by you. The Test Results were sent to you vide Bureau of E nergy Efficiency letter No... ..... dated........in the name of your authorised Contact person. You were also requested to attend and witness the Second Check Verification Test of the samples at the National Accreditation Board for Testing and Calibration Laboratories Accredited Laboratory M/s.................................................... 5.The Sample for second check verification Test were picked up …. dated the …. through our authorised Agency M/s. ............and transported to the National Accre ditation Board for Testing and Calibration Laboratories accredited Laboratory transported by our authorised Agency, duly sealed by M/s............... and was given Unique Identification serial number embossed on the said sample obtained from ........... .... ..........under signatures of the duly authorised representative of the verification Agency as well as your representatives. 6. The Test results of second check testing are enclosed which are dully checked and counter signed by the competent authori sed personnel of the National Accreditation Board for Testing and Calibration Laboratories Accredited Laboratory. The test report is also duly signed by your authorised signatory as witness of 2nd check testing. The Test Results confirm that they failed to meet the requisite parameters and standards given in S.O.number …. dated, …. and the terms and conditions of the permission given to you for display of particulars on label affixed to the Washing Machine manufactured or imported and sold in the market . 7. Now, therefore in exercise of the power conferred clause (a) of sub -regulation (7 ) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Washing Machine ) Regulations, 2023 , the Bureau hereby directs to :- (i) correct the star level displayed on the label of the washing machine or remove the defects and deficiencies found during testing; Brand Model Rated Capacity Rated Energy Consumption per kg per cycle Tested value of Energy Consumption per kg per cycle Star rating (Declared) Star rating (Check tested) Remarks (ii) withdraw all the stocks from the market to comply with the directions of the Bureau; and (iii) change the particulars displ ayed on advertising material. 8. You are hereby directed to complete the aforesaid corrective action within two months from the date of issue of this letter and send the compliance report in Form VI withi n ten days after the expiry of two months i.e. by . ............. .In case no compliance report is received by the said date the Bureau shall proceed to take action in terms of clause (b) of sub -regulation (10 ) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels of Washing Machine ) Regulations, 2023 . 9. The Bureau shall take further follow up action in matter in terms of regulation (5), (6),(7) and (8) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Labels o f Washing Machine) Regulation, 2023. Secretary, Bureau of Energy Efficiency Enclosures: 1. Test reports of the failed model 2. Correspondence with the manufacturer Form VII [See sub -regulation (8 ) of regulation 11] Action Taken Report (To be furnished on the letter head of the organisation) To Dated… ………….. .. THE SECRETARY, BUREAU OF ENERGY EFFICIENCY (MINISTRY OF POWER, GOVERNMENT OF INDIA) 4TH FLOOR, SEWA BHAWAN, SECTOR 1, R.K.PURAM, NEW DELHI -110066 INDIA. Pursuant to the provisions of regulation 7 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine ) Regulations, 2023 , we M/s..................................................................... ...............the manufacturer of washing machine were permitted to affix label on the washing machine conforming to the energy consumption standard of ................star level vide Bureau of Energy Efficiency letter No.................dated.......... .....for the model number.......................................... Pursuant to the provisions of sub -regulation (7 ) of regulation 11 of the Bureau of Energy Efficiency (Particulars and Manner of their Display on Label of Washing Machine ) Regulations, 202 3, we were given directions vide Bureau of Energy Efficiency letter number....................dated........... to take necessary corrective action. In the light of dire ctive issued by Bureau of Energy Efficiency, we hereby declare that the following action s have been taken at our end. Action Directed Status Action Taken (i) Correct the star level displayed on the label of the washing machine to comply with the directions of the Bureau Yes/No/NA The star level has been corrected from....... .......star to.......................star with effect from (Date) (ii) Withdraw all the stocks from the market to comply with the directions of the Bureau. and Yes/No/NA All the stocks from the market have been withdrawn to comply with the directions of the Bureau. (iii) Change the particulars displayed on advertising material. Yes/No/NA Yes/No/NA The above declaration is true to the best of our knowledge and belief. Signature………………….. Name……………………… Designation……………….. For and on behalf of......... .... Name of the Company/Firm etc Seal of the Firm/Company”. SCHEDULE [See sub -regulation (2) of regulation 3] Particulars to be displayed on labels of Washing Machine. (a) Label design, size, colour scheme and content of the label shall include: - (i) the followi ng dimensional design of label, namely: — (ii) the following colour scheme for the label, namely: — BLUE – Hue(H) -239o Saturation(S):64% Brightness(B):59% Luminance or lightness(L) :28, chromatic components -a:24 b:54 Red(R):54 Green(G):55 Blue(B):151 Cyan(C):97% Magenta(M):95% Yellow(Y):6% Black(K):1% Web colour code - #363797 GREEN – Hue(H) -150o Saturation(S):10% Brightness(B):67%, Luminance or lightness(L) :61, chromatic components - a:-53 b:32, Red(R):0 Green(G):170 Blue(B):87 Cyan(C):81 % Magenta(M):10% Yellow(Y):90% Black(K):1%, Web colour code - #00AA56; (iii) following label to be affixed on washing machine: - (2) Label Material The label shall be of durable cardboard, if it is to be attached as a swing tag, or be self -adhesive a nd shall be cut to one of the outlines shown in dimension design scheme for the label”. Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi -110064 and Published by the Controller of Public ations, Delhi -110054.